Garmin RINO 130 Owner's Manual - Page 113
Radio Troubleshooting Guide
UPC - 753759031978
View all Garmin RINO 130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
APPENDIX > RADIO TROUBLESHOOTING GUIDE Radio Troubleshooting Guide Symbol Probable Cause Remedy Radio not transmitting Messages not being received by others. Limited talk range. You can hear others, but they cannot hear you, or you see an incoming transmission, but nothing is heard. Message garbled. Too many unwanted conversations being heard. Interference or static. Cannot transmit location. None of the keys except Talk will work. Rino® 130 Owner's Manual Talk key may not be fully depressed FRS/GMRS Radio feature may not be on. Incorrect channel/Squelch Code setting Out of range or obstructions. Natural or man-made obstructions can decrease range. You are on the same channel, but a different Squelch Code. Scramble option is enabled. Too many users on channel or Squelch Code is set to zero. Radios too far apart or too close. Obstructions in radio line of sight. Interference from other electronics. Could be one of a few things: Your view of the satellite is obstructed and a GPS fix is not available. Send Location is off. 30 seconds have not elapsed since last location transmission. GPS is set to off. Keylock is enabled. Press and hold Talk key until done talking. Turn radio on. Make sure other radios are on the same channel and Squelch Code. Decrease distance between radios. Decrease distance between radios or obtain a better line of sight between radios. If you are using Squelch Code zero (0), you will hear all transmissions on that channel. Use the same Squelch Code (1-38) as the other party or use Scan to find what Squelch Code they are on. Both radios need to have this feature set the same (Rino 110 units do not have voice scramble). Switch to a different channel and/or Squelch Code other than zero (1-38). Keep radios at least 3 feet apart. Obtain a better line of sight between radios. Shut off other devices or move to a different area. Move to a location with a clear view of the sky. Enable Send Location. Wait 30 seconds between location transmission. Enable GPS. Hold Page for 5 seconds to release keylock. 107