Garmin RINO 520 Owner's Manual - Page 23

Unit Operation > Radio Page 4. To Scan Current Codes, highlight the Option Menu and press the Thumb Stick In. Choose the desired setting and press the Thumb Stick In. The Code field is blank when the unit is scanning or monitoring channels until a signal is received and it pauses. To set up a Scanlist: 1. Using the Thumb Stick, highlight the Option Menu button and press In. Highlight Setup Scanlist and press the Thumb Stick In. 2. To add/remove a channel from the list, highlight the channel and press the Thumb Stick In to add/remove the check mark in front of the name. Only channels that are checked will be scanned. 3. To select all channels or clear all channels, highlight either the Select All or Clear All buttons and press the Thumb Stick In. Scanlist Page Radio Page Option Menu The Radio Page Option Menu allows you to customize aspects of your Rino 520/530, such as setting up the radio, programming call and ring tones, and setting up a scanlist. Rino 530 option only Radio Page Option Menu Rino® 520/530 Owner's Manual 13