Garmin StreetPilot I2 Owner's Manual   - Page 30

Resetting Your StreetPilot, My i2 or i3 is asking me to insert the microSD TransFlash card.

Page 30 highlights

APPENDIX My i2 or i3 is asking me to insert the microSD (TransFlash) card. Check the microSD card slot on the side of your StreetPilot. Insert the microSD card if it is not in the card slot. If your StreetPilot did not come with a microSD card, contact your Garmin dealer. If the microSD card is present, you may need to reset your StreetPilot. Press in on the card to remove it from the slot. Then follow the instructions on page 26 to reset your StreetPilot. After you reset the StreetPilot, reinsert the card into the card slot. Resetting Your StreetPilot If your StreetPilot freezes (stops responding to button presses), try turning it off and then on again. If this does not help, remove the batteries and then reinsert them. Disconnect from external power, if necessary. Clearing all User Data If resetting does not fix your problem, you may need to clear all user data from your StreetPilot. IMPORTANT: if you clear all user data, you will delete all saved locations from My Favorites and all settings in your StreetPilot. Be sure you want to clear all user data before proceeding. To clear all user data, press and hold down all buttons in the following order: , Wheel, Power. Continue holding down all buttons until you see a prompt, "Do you really want to erase all user data?" Select Yes. Garmin © 2006 26 StreetPilot® i2/i3/i5 Owner's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35

Garmin © 2006
26
StreetPilot
®
i2/i3/i5 Owner’s Manual
A
PPENDIX
My i2 or i3 is asking me to insert the microSD (TransFlash) card.
Check the microSD card slot on the side of your StreetPilot. Insert the microSD card if it is not in the card
slot. If your StreetPilot did not come with a microSD card, contact your Garmin dealer. If the microSD
card is present, you may need to reset your StreetPilot. Press in on the card to remove it from the slot.
Then follow the instructions on
page 26
to reset your StreetPilot. After you reset the StreetPilot, reinsert
the card into the card slot.
Resetting Your StreetPilot
If your StreetPilot freezes (stops responding to button presses), try turning it off and then on again. If this
does not help, remove the batteries and then reinsert them. Disconnect from external power, if necessary.
Clearing all User Data
If resetting does not fix your problem, you may need to clear all user data from your StreetPilot.
IMPORTANT
:
if you clear all user data, you will delete all saved locations from My Favorites
and all settings in your StreetPilot. Be sure you want to clear all user data before proceeding.
To clear all user data, press and hold down all buttons in the following order:
,
Wheel
,
Power
.
Continue holding down all buttons until you see a prompt, “Do you really want to erase all user data?”
Select
Yes
.