Garmin Varia Vision In-sight Display Owner s Manual - Page 6
Device Settings, Device Information
View all Garmin Varia Vision In-sight Display manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Pairing the Varia Vision Device with Your Garmin® Device Pairing is the process of connecting an ANT+® accessory, such as the Varia Vision device, with a Garmin ANT+ compatible device such as the Edge® 1000. • For optimal performance, you may need to update your Edge software to the latest version available. • Bring the Garmin compatible device within 3 m of the ANT+ accessory. • Stay 10 m away from other ANT+ sensors while pairing. After you pair the first time, your Garmin compatible device automatically recognizes the ANT+ accessory each time it is activated. Pairing the Varia Vision Device with Your Edge 1000 Device Before you can pair the devices, you must update the Edge software. For optimal performance, you may need to update your Edge software to the latest version available. 1 Bring the Edge device within range (3 m) of the accessory. NOTE: Stay 10 m away from other ANT+ sensors while pairing. 2 Turn on the Edge device. 3 From the home screen, select > Sensors > Add Sensor. 4 Turn on the Varia Vision accessory. 5 Select your sensor, and select Add. When the accessory is paired with your Edge device, the status icon appears solid on the connections page. Pairing with Your Edge 520 Device Before you can pair the devices, you must update the Edge software. For optimal performance, you may need to update your Edge software to the latest version available. 1 Bring the Edge device within range (3 m) of the accessory. NOTE: Stay 10 m away from other ANT+ sensors while pairing. 2 Turn on the Edge device. 3 From the home screen, select Menu > Settings > Sensors > Add Sensor. 4 Turn on the Varia Vision accessory. 5 Select your sensor, and select Add. When the accessory is paired with your Edge device, the status icon appears solid on the connections page. Pairing Your Device with Varia™ Radar Device 1 Bring the device within range (3 m) of the Varia radar device. NOTE: Stay 10 m away from other ANT+ sensors while pairing. 2 Turn on the Varia Vision device. When the device is paired with your radar, the device connected page appears. Viewing Varia Radar Data on Your Varia Vision Device Go for a ride. When paired with the Edge device and the Varia radar device information appears on the active data screen. The vehicle position LED moves up the target status bar À LED as a vehicle gets closer to your bike. The threat level Á LED and column change color based on the potential  Á level of threat. Green indicates no vehicle is detected. Orange indicates a vehicle is approaching. Red indicates a vehicle is advancing at a high rate of speed. The Varia Vision device vibrates when the threat level changes. Radar Detection • The radar detects approaching vehicles up to 140 m away. • The approaching vehicle speed must be from 10 to 160 km/h (from 6 to 99 mph). NOTE: The radar does not detect vehicles traveling at the same speed as your bike. • The radar beam width is 40 degrees. It provides radar coverage for typical bends in the road. • The radar can detect up to eight approaching vehicles. Device Settings You can remotely control your Varia devices and customize settings using your compatible Edge device. This section contains instructions for the Edge 1000 device. Other compatible Edge devices use similar settings. Display Settings From your Edge sensor screen, select your Varia Vision device, and select Display Settings. Auto Brightness: Automatically adjusts the backlight brightness based on the ambient light. Display Mode: Sets the display mode to Stays On for the display to be continuously on, or On Demand/Alert Only to save battery power. On Demand/Alert Only mode automatically turns the display off when not in use. Auto Scroll: Sets the display speed of the scrolling data screens while the timer is running. Background Color: Sets the device to display day or night colors. The Auto option allows the device to automatically set day or night colors based on the time of day. Customizing the Data Screens You can customize the data fields for each data screen. 1 From your Edge device, select your Varia Vision device. 2 Select Data Screens. 3 Select a training page. 4 If necessary, enable the data screen. 5 Select or to select a Data Field Layout. 6 Select a data field to change. 7 Select a category. 8 Select an option. Device Information Specifications Battery type Battery life Battery charge time Water rating Operating temperature range Rechargeable, built-in lithium-ion battery Up to 8 hr. Approximately 1.5 hr. IEC 60529 IPX7* From -20º to 60ºC (from -4º to 140ºF) 2 Device Settings