Garmin Varia eRTL615 Owners Manual - Page 6

Installing the Device on a Seat Mount, Tips for Installing the Device

Get Garmin Varia eRTL615 PDF manuals and user guides View all Garmin Varia eRTL615 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

Installing the Device on a Seat Mount Before you can install the Varia eRTL615 tail light, you need 3 mm and 4 mm hex keys and a cable to connect your device. 1 Attach the friction flange adapter to your Varia eRTL615 tail light using two M4 screws. 2 Using a 3 mm hex key, tighten the two M4 screws to 1 N-m (9 lbf-in.). 3 If you have other attachments on the back of your seat, attach the extender to the friction flange adapter using an M5 screw. 4 Align the hole in the friction flange adapter or the extender with the hole in the center of the seat mount bracket. 5 Attach the device to the seat mount bracket loosely using an M5 screw. NOTE: The M5 screw will be fully tightened after positioning the device on your bike. 6 Attach the bracket to the rails under the seat. 7 Using a 4 mm hex key, tighten the two M5 screws on the bracket to 2 N-m (18 lbf-in.). 8 Position the device (Tips for Installing the Device, page 1). 2 Introduction

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
Installing the Device on a Seat Mount
Before you can install the Varia eRTL615 tail light, you need 3 mm and 4 mm hex keys and a cable to connect
your device.
1
Attach the friction flange adapter
to your Varia eRTL615 tail light using two M4 screws.
2
Using a 3 mm hex key, tighten the two M4 screws to 1 N-m (9 lbf-in.).
3
If you have other attachments on the back of your seat, attach the extender
to the friction flange adapter
using an M5 screw.
4
Align the hole in the friction flange adapter or the extender with the hole in the center of the seat mount
bracket.
5
Attach the device to the seat mount bracket loosely using an M5 screw.
NOTE:
The M5 screw will be fully tightened after positioning the device on your bike.
6
Attach the bracket
to the rails under the seat.
7
Using a 4 mm hex key, tighten the two M5 screws on the bracket to 2 N-m (18 lbf-in.).
8
Position the device (
Tips for Installing the Device
, page 1
).
2
Introduction