Garmin Xero S1 Trapshooting Trainer Owners Manual - Page 11

Cleaning the Outer Casing NOTICE Avoid chemical cleaners and solvents that can damage plastic components. 1 Clean the outer casing of the device (not the screen) using a cloth dampened with a mild detergent solution. 2 Wipe the device dry. Cleaning the Touchscreen 1 Use a soft, clean, lint-free cloth. 2 If necessary, lightly dampen the cloth with water. 3 If using a dampened cloth, turn off the device and disconnect the device from power. 4 Gently wipe the screen with the cloth. Cleaning the Camera Lens NOTICE Avoid chemical cleaners and solvents that can damage plastic components. You should clean the camera lens regularly to keep the camera lens free of dirt and debris. 1 Wipe the lens with a non-scratch lens cloth, optionally dampened with isopropyl alcohol. 2 Allow the lens to air dry. Specifications Battery type Rechargeable, built-in lithium-ion battery Wireless frequency/protocol 2.4 GHz @ -0.74 dBm nominal 24 GHz @ 19.51 dBm nominal Operating temperature range From 0º to 60ºC (from 32º to 140ºF) Charging temperature range From 7º to 43°C (from 45º to 109°F) Water rating IEC 60529 IPX71 Resetting Data and Settings The device offers several options for deleting your user data and resetting all settings to factory default values. 1 Select > SYSTEM > RESET. 2 Select an option: • To reset all settings to default values, select SETTINGS. • To format and erase all user data stored on the device, select FORMAT STORAGE. • To delete all user data and reset all settings to factory default values, select FACTORY RESET. Getting More Information You can find more information about this product on the Garmin website. • Go to support.garmin.com for additional manuals, articles, and software updates. • Go to buy.garmin.com, or contact your Garmin dealer for information about optional accessories and replacement parts. Viewing E-label Regulatory and Compliance Information The label for this device is provided electronically. The e-label may provide regulatory information, such as identification numbers provided by the FCC or regional compliance markings, as well as applicable product and licensing information. 1 Select . 2 Select SYSTEM. 3 Select REGULATORY INFO. Troubleshooting The device is showing incorrect distances • When using trap mode, verify that no part of the trap thrower extends above the alignment window. • When using upland mode, verify that no part of the trap thrower is visible on the device screen. • Verify the clay target is visible on the screen during its entire flight path. • Verify there are no obstructions in front of the device that could interfere with wireless frequencies, such as tall grass or branches. 1 *The device withstands incidental exposure to water of up to 1 m for up to 30 min. For more information, go to www.garmin.com/waterrating. Troubleshooting 7