Garmin fleet 670V Owner s Manual - Page 19
Connecting to a Wireless Display
View all Garmin fleet 670V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Resetting to Factory Default Values Before you reset the device to its factory default values, you should back up all user data. This enables you to retrieve important data, if necessary. NOTICE Data deleted through a factory reset cannot be restored from the internal storage. You can reset the device to its factory default values. This removes all applications, accounts, and user data. If data backup is enabled, some account and user data may be restored from your backup account after the factory reset, but many user data types are not included in this backup. Select Settings > Backup & Reset > Factory Data Reset. Appendix Connecting to a Wireless Network 1 Select Settings > Wi-Fi. 2 If necessary, select the toggle switch to turn on wireless network technology. 3 If necessary, select Scan to scan for available networks. 4 Select a wireless network. 5 If necessary, enter the encryption key. The device connects to the wireless network. The device remembers the network information and connects automatically when you return to this location in the future. Connecting to a Wireless Display You can show the contents of the device screen on a compatible external display using wireless technology. 1 Select Settings > Miracast. 2 If necessary, select the toggle switch to turn on wireless display technology. 3 If necessary, select Search for Displays. 4 Select a wireless display. 5 If necessary, enter the PIN. Connecting a Backup Camera NOTE: This feature is available only for the Garmin fleet 670V model. On supported models, the device mount includes a 3.5 mm composite video input jack. You can connect a composite video backup camera and view the output on the device screen. Plug the camera video cable into the video input jack on À the device mount. Viewing the Backup Camera Your device shows video from the connected backup camera in different ways, depending on how the camera is connected to power. 1 Select an option to show video: • If the camera is connected to a reverse lamp (recommended), place the vehicle into reverse. The device automatically shows video from the backup camera. • If the camera is connected to a steady power source, from the notification panel, select . 2 Select an option to resume normal device operation: • If the camera is connected to a reverse lamp (recommended), take the vehicle out of reverse. The device automatically resumes normal operation. • If the transmitter is connected to a steady power source, select . remains in the notification panel as long as the device receives a video input signal. Specifications Operating temperature range Charging temperature range (vehicle power) Power input type Battery type Input -20° to 60°C (-4° to 140°F) 0° to 40°C (32° to 104°F) Vehicle power using an optional accessory. AC power using an optional accessory for home or office use only. Rechargeable lithium-ion, 3.7 Vdc Maximum DC 5 V, 2 A Charging the Device NOTE: This Class III product shall be powered by an LPS power supply. You can charge the battery in the device using any of these methods. • Connect the device to the vehicle power cable. • Connect the device to a computer using a USB cable. The device may charge slowly when connected to a computer. Some portable computers may not charge the device. • Connect the device to an optional power adapter accessory, such as a wall power adapter. You can purchase an approved Garmin AC-DC adapter suitable for home or office use from a Garmin dealer or www.garmin.com. Device Care NOTICE Avoid dropping your device. Do not store the device where prolonged exposure to extreme temperatures can occur, because it can cause permanent damage. Never use a hard or sharp object to operate the touchscreen, or damage may result. Do not expose the device to water. Cleaning the Outer Casing NOTICE Avoid chemical cleaners and solvents that can damage plastic components. 1 Clean the outer casing of the device (not the touchscreen) using a cloth dampened with a mild detergent solution. 2 Wipe the device dry. Cleaning the Touchscreen 1 Use a soft, clean, lint-free cloth. 2 If necessary, lightly dampen the cloth with water. Appendix 15