Garmin zumo 220 Quick Start Manual - Page 7
Configuring the zūmo, Acquiring Satellites, Resetting the zūmo
UPC - 753759101657
View all Garmin zumo 220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Install Your zūmo in the Mount 1. Fit the bottom of your zūmo into the cradle. 2. Tilt the zūmo back into the cradle. 3. Press down the release lever. Release lever Cradle Remove Your zūmo from Either Mount 1. Press the release lever on the top of the mount to release the zūmo. 2. Lift out the zūmo. Configuring the zūmo To turn on your zūmo, press and hold . Follow the on-screen instructions. Acquiring Satellites Go outdoors to an open area, out of garages, and away from tall buildings. Stop your vehicle, and turn on the zūmo. Acquiring satellite signals may take a few minutes. The bars indicate satellite strength. When the bars are green, the zūmo has acquired satellite signals. Now you can select a destination and navigate to it. Resetting the zūmo If the zūmo stops functioning, turn the zūmo off and on again. If this does not help, press and hold for 10 seconds. The zūmo should operate normally. You can also remove the battery, and then reinstall it. zūmo 220 Quick Start Manual