Gastroback 40126 User Manual - Page 9
Operating
View all Gastroback 40126 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
operating Assembling your Design Juicer Step 1: Place the filter bowl surround on the motor block (picture 1). Step 2: WARNING: Handle the parts with care and do not use any force. Pay attention to the sharp blades on the stainless steel micro mesh filter and the feed chute to avoid injury. Always completely assemble your juicer before you plug the plug into the power outlet. ATTENTION: Ensure the stainless steel fil- 1 ter basket is clean before assembling. Any dehumidified left over food on the basket will block the fine mesh holes. If necessary remove excess fibre build up (from fruit or vegetables) according to the instructions ›Care and Cleaning‹. Align the arrows on the stainless steel filter basket with the arrows on the motor drive coupling and push down until it clicks into place. Ensure the stainless steel filter basket is fitted securely inside the integrated pulp container and onto the motor base (picture 2). 2 2 Step 3: Place the juicer cover over the stainless steel filter on top of the filter bowl surround (picture 3). The feed chute has to be posi- tioned in the middle of the filter basket and the pulp spouting of the cover has to face away from the interlocking safety arm. 3 41