Gastroback 41001 User Manual - Page 22

to loose any accessories, it is good advice to store the blender completely and properly assembled. Trouble shooting The Design Mixer Advanced Electronic is reliable and robust and handling it with care it will operate properly. For the case that problems show up you can solve the problems on your own using the trouble shooting guide. WARNING: Only use the appliance for the intended use. For attendance and repair take the appliance to an authorised service centre. Problem Solution Motor doesn't start or blade Check that the power plug is securely inserted into the power outlet and switched on Check doesn't rotate that the blender jug and lid are securely locked into position. Check that the Power-button and selected function or speed setting is illuminated. Be sure to press only one speed or function button at a time. The motor stucks or slows Use a higher speed for processing. If necessary (because the blender jug is overloaded) pour out down part of the content of the blender jug. Chop hard ingredients such as nuts or chocolate before putting them into the blender jug. The motor stops or you can Turn the appliance off, if the motor stops all of a sudden or stalls during operation to avoid overnot turn the motor on again heating. Go through following checking list: - The appliance automatically shuts off after operating for 2 minutes. If you want to operate again, unplug the appliance, wait 1 minute and plug in again. - Take the blender jug off the motorblock and clear out firmly bounded food that blocks the blade using a spoon. Do not use force to avoid damaging the blade. - Chop hard ingredients such as nuts or chocolate before putting them into the blender jug. If necessary (because the blender jug is overloaded) pour out part of the content of the blender jug and try to restart the motor using a higher speed. - ATTENTION: Do not try to mix ingredients of very hard consistency or ingredients which are too big in size to avoid overloading the motor. Do not overfill the blender jug. Process very hard food in more then one go. The mixer is not intended for chopping nuts with shell, bones or simular hard ingredients. The bottom of the blender Turn the appliance off and pull the plug out of the power outlet. Empty the blender jug. Clean juguntightens during opera- and dry the motorblock. If any ingress of moisture into the motorblock or through the louvre tion; liquid leaks. take the appliance for technical maintenance and repair to an authorised specialised reparation shop. Ensure the blender jug is properly assembled. TIP: Before filling liquid into the blender jug check if the blender jug is leak-proof by filling it with water. Check the sealing ring. If necessary replace damaged parts by original spare parts of the manufacturer. It is not possible to get the Empty the blender jug. Disassemble the blender jug and check if there are crusts or damages blender jug leak-proof; on the single parts. Clean the parts if necessary. Liquid leaks from the bot- Replace damaged parts by original spare parts of the manufacturer. Assemble the blender jug tom of the blender jug. according to the instructions. ATTENTION: Never use the appliance with improper or damaged parts. Only use spare parts provided and made by the manufacturer. Contact you vendor for help. 62