Gastroback 41006 User Manual - Page 16

Directions for use • The mixer proceeds fast and reliable when you add the ingredients one after the other in small portions. • The mixer processes within seconds. Avoid processing food longer then necessary. • Always ensure the lid is closed before starting the motor to avoid spilling. • You can add ingredients during the operation through the refill aperture. Never place your face or hands over the opening. • If the motor slows down using the Smoothie or Blend function use the Ice Auto Pulse function. With short bursts of power you can pre-process the food before blending them with the other functions. • Always clean the appliance right after use. • If ingredients get stucked on the walls of the blender jug turn the appliance off, take the blender jug off the motorblock, open the lid and push the food down carefully using a spatula. Take care of the blade. ATTENTION: Open the refill aperture when mixing warm food and cover it with a kitchen towel. This way excess pressure and steam can escape. Production steps WARNING: Ensure the blender jug is locked securely onto the motorblock and that you can not knock the appliance over during operation to avoid personal injury. Connected the plug to the power outlet. Note: The motor wont start before the appliance is set into operational mode and a function is selected. 1. If the appliance is properly assembled and securely locked onto the motorblock fill the ingredients into the blender jug. Do not fill the blender jug above the 'MAX' line (2 litre). IMPORTANT: Food with hard texture should be cut in pieces of 2 cm size before filling them into the blender jug. Fill liquids in first. Do not overload the blender jug to avoid spilling or overloading the motor. 2. Place the lid on the blender jug and press the lid down to seal the top of the blender jug. Close the opening of the lid with the inner lid. Note: The blender features a patented assist lid. This allows the lid to fit tightly onto the blender jug, avoiding displacement during operation. The ring pull design allows the user to easily remove the lid with a simple leverage action. WARNING: Never take the blender jug off the motorblock, the lid of the blender jug or place a spoon or other foreign substance into the blender jug while the motor is running. Always turn the appliance ›Off‹ first and wait for the motor to stop moving. Now you can take the blender jug off the motorblock remove the lid and check on the ingredients. WARNING: Do not fill ingredients into the blender jug which exceed a temperature of 60 degrees. After processing ice cubes slowly heat up the blender jug before processing hot ingredients. Otherwise the blender jug will crack or gets damaged. Use gloves processing hot 54