Gastroback 42620 User Manual - Page 22

RESETTING DEFAULT VOLUMES To reset the machine to the default one and two shot pour quantities, press and hold the PROGRAM-button until the machine beeps three times. Release button. This indicates the machine has returned to its original default settings. MANUAL FUNCTION The Manual function over-rides the preset shot size for one time only. It does not save the shot size like in programming mode. Press and hold the -button or -button. Release the button once sufficient espresso has flowed into the cup. STEP 10 - EMPTYING THE PORTAFILTER • Remove the portafilter from the group head by rotating the portafilter to the left until it releases. • To empty the used grounds, turn the portafilter upside down in a bin and gently knock out the grounds. Used grounds should be thrown away with domestic waste. Discarding of used grounds in a sink can cause drains to become blocked. • With the filter still in place, hold the portafilter underneath the group head, press and hold down the one cup button to release hot water. Rinse the portafilter until water runs clear. • Insert the portafilter back into the group head to dry out and keep warm. WARNING: THE METAL PARTS OF THE PORTAFILTER WILL BE VERY HOT. THE ART OF TEXTURING MILK The appliance comes complete with a commercial style swivel steam wand. • Fill the stainless steel frothing jug maximum ½ full with cold, fresh milk. • Turn the steam selector dial to the Steam-position. The red steam light will start to flash indicating that the machine is heating to create steam. • When the steam light stops flashing it is ready to use. • Before inserting the wand into the milk, pause the steam by returning the dial back to the STAND BY-position. This will avoid splashing the milk out of the jug (this pause function lasts for 6 seconds before exiting steam mode). • Insert the wand into the milk and return the Steam dial back to Steamposition. • To stop, return the steam dial to the STAND BY-position and remove the jug. Note: When the espresso machine creates steam, a pumping noise can be heard. This is the normal operation of the 17 Bar pump. Note: After 5 minutes of continuous steaming, the machine will automatically disable the steam function. The steam light will flash. When this occurs return the steam dial to the STAND BY-position. WARNING: Milk should not be allowed to run over the top of the frothing attachment, otherwise it will not function properly. To avoid splattering of hot milk, do not lift the end of 58