Gateway C-140X 8512714 - Gateway Notebook Reference Guide R5 for Windows XP - Page 72
To replace the main battery
View all Gateway C-140X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
CHAPTER 5: Managing Power To replace the main battery: 1 Disconnect your convertible notebook from the optional port replicator. 2 If your convertible notebook is on and is connected to AC power or has a charged multibay battery installed, go to step 3. -ORIf your convertible notebook is on, is not plugged into an AC outlet, and does not have a charged multibay battery installed, save your work and turn off the convertible notebook. 3 Make sure the LCD panel is in notebook mode, then close the LCD panel. For more information, see "Converting from notebook to tablet mode" on page 41. 4 Turn your convertible notebook over so the bottom is facing up. 5 Slide the battery lock to the unlocked position, then slide the battery release latch. 6 Slide the main battery out of the bay. 7 Slide a recharged main battery into the bay until it snaps into place. 8 Slide the battery lock to the locked position. 9 Turn your convertible notebook over. 10 Open the LCD panel. 64