Gateway E-4300 Gateway E-4300 Computer User's Guide - Page 67
Closing the case, Removing the front bezel, To close the case
View all Gateway E-4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Closing the case To close the case: 1 Make sure that all of the internal cables are arranged inside the case so they will not be pinched when you close the case. 2 Align the tabs on the front of the panel into the case notches. 3 Swing the side panel toward the case until it is flush with the side of the case. 4 Replace the thumbscrews. 5 Reconnect the cables and power cord. Removing the front bezel Some upgrading procedures may require you to remove the front bezel. To remove the front bezel: 1 Open the case by following the instructions in "Opening the case" on page 60. 2 In the lower front area of the case, press the two bezel retention tabs outward until the lower part of the bezel detaches from the case. www.gateway.com 61
61
www.gateway.com
Closing the case
To close the case:
1
Make sure that all of the internal cables are arranged inside the case so they will not
be pinched when you close the case.
2
Align the tabs on the front of the panel into the case notches.
3
Swing the side panel toward the case until it is flush with the side of the case.
4
Replace the thumbscrews.
5
Reconnect the cables and power cord.
Removing the front bezel
Some upgrading procedures may require you to remove the front bezel.
To remove the front bezel:
1
Open the case by following the instructions in
“Opening the case” on page 60
.
2
In the lower front area of the case, press the two bezel retention tabs outward until
the lower part of the bezel detaches from the case.