Gateway E-4610D 6-bay mBTX Pro Hardware Reference Guide. (for computers with W - Page 63
Replacing the system board
View all Gateway E-4610D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
www.gateway.com 4 Slide the power supply away from the back of the computer, then pull it down and remove it. 5 Install the new power supply into the case, then install the three screws to secure the power supply to the case. 6 Reconnect the power supply cables using your notes from Step 2. 7 Return the computer to an upright position, then replace the side panel. 8 Reconnect all external cables and the power cord. Replacing the system board To replace the system board: 1 Remove the side panel by following the instructions in "Opening and closing the case" on page 37. 2 Remove all expansion cards by following the directions in "Adding or replacing an expansion card" on page 47. 3 Remove the front fan by following the directions in "Replacing the front fan" on page 49. 4 Remove the memory from your computer by following the directions in "Installing memory" on page 41. 5 Disconnect the power and data cables from the system board, noting their locations and orientation. (You will reconnect the cables after you install the new board.) 6 Remove the power supply by following the directions in "Replacing the power supply" on page 56. 57