Gateway ML3706 Component Replacement Manual - Page 11

Replacing the Wireless Network Module

Page 11 highlights

9 Press outward on the clip at each side of the module until the module tilts upward. Clip Clip 10 Pull the module out of the slot. Replacing the Wireless Network Module 11 Hold the new module at a 30-degree angle and insert it into the empty slot. This module is keyed so it can only be inserted in one direction. If the module does not fit, make sure that the notch in the module lines up with the tab in the module slot. 12 Move the antenna wires out of the way. 13 Press the module down until it clicks into place. 14 Reattach the black antenna cable to the connector labelled MAIN or M, then reattach the light gray antenna cable to the connector labelled AUX or A. 15 Replace the wireless network bay cover, then tighten the cover screw. 16 Insert the battery, then turn your notebook over. 17 Connect the power adapter, the modem cable, and the network cable. 18 Reconnect all peripheral devices and replace any Express cards. 19 Turn on your notebook. Technical Support See the label on the bottom of the notebook for Customer Care Information. See your Reference Guide for important safety, regulatory, and legal information. 2 www.gateway.com © 2007 Gateway, Inc. All rights reserved. Gateway and eMachines are trademarks or registered trademarks of Gateway, Inc. in the United States and other countries. All other brands and product names are trademarks or registered trademarks of their respective companies.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11

2
www.gateway.com
Replacing the Wireless Network Module
Technical Support
See the label on the bottom of the notebook for Customer
Care Information. See your
Reference Guide
for important
safety, regulatory, and legal information.
© 2007 Gateway, Inc. All rights reserved. Gateway and
eMachines are trademarks or registered trademarks of
Gateway, Inc. in the United States and other countries.
All other brands and product names are trademarks or
registered trademarks of their respective companies.
9
Press outward on the clip at each side of the module
until the module tilts upward.
10
Pull the module out of the slot.
11
Hold the new module at a 30-degree angle and insert
it into the empty slot. This module is keyed so it can
only be inserted in one direction. If the module does
not fit, make sure that the notch in the module lines
up with the tab in the module slot.
12
Move the antenna wires out of the way.
13
Press the module down until it clicks into place.
14
Reattach the black antenna cable to the connector
labelled
MAIN
or
M
, then reattach the light gray
antenna cable to the connector labelled
AUX
or
A
.
15
Replace the wireless network bay cover, then tighten
the cover screw.
16
Insert the battery, then turn your notebook over.
17
Connect the power adapter, the modem cable, and
the network cable.
18
Reconnect all peripheral devices and replace any
Express cards.
19
Turn on your notebook.
Clip
Clip