GE 24933 Instruction Manual - Page 16

Trouble Shooting Problem Solution Indicator light not A) Replace the batteries blinking when (with fresh, new AAA you press any key Alkaline batteries). B) Check that batteries are properly installed. The remote does not operate your device A) Try all the codes listed for your brand. B) Try the Code Search method (page 8). Not performing Start Code Search over again commands to locate the proper code. properly Problems Try the VCR code for your programming brand. Some combo units, a TV/VCR Combo however, may require both Unit a TV and a VCR code for full operation. VCR not recording As a safety feature on your remote, you must press the REC button twice. Channel up and down do not function on an RCA TV Due to some designs, the original remote will only perform these functions. Problems changing channels If your original remote required ENTER after a channel, press ENTER after you select a channel. No response after pressing a key A) Make sure you have new batteries, and you are aiming your remote at your devices. B) Check that batteries are properly installed. See page 2. 15