GE 29897GE1 User Guide - Page 14
Toll Saver, Setting the Security Code, Setting the Dialing Mode
![]() |
UPC - 044319302622
View all GE 29897GE1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
3. When finished, press ENTER to confirm. The unit beeps. NOTE: To skip to the next setting, press MENU. To exit setup, press EXIT. Toll Saver Toll Saver can save you the cost of a call when you access your messages from another phone: • If you have new messages, the unit answers after the 2nd ring. • If you have no new messages, the unit answers after the 5th ring. You can hang up after the 3rd ring and save the pay telephone or long distance charge. Setting the Security Code This feature allows you to change the factory default remote access code used for remote access to you answerer. The default code is 123. 1. If you just adjusted the Rings to Answer menu, skip to step 2. If you haven't adjusted any other setting, press and release the MENU button until REMOTE ACCESS is displayed. 2. Use NEXT or REVIEW to select the first digit. 3. Once the first digit is set, press ENTER. The unit beeps to confirm. 4. Repeat steps 2-3 until all the digits of the security code are set. NOTE: To skip to the next setting, press MENU. To exit setup, press EXIT. TIP: You can use the keypad to enter all the digits in one step. To enter 456, press 4, 5, and 6. Then press ENTER. Setting the Dialing Mode This adjustment allows you to select tone (touch-tone) or pulse (rotary) mode dialing. The phone is automatically set for touch-tone use. 14
![](/manual_guide/products/general-electric-29897ge1-user-guide-c611e5d/14.png)