GE 29897GE1 User Guide - Page 8
Wall Mounting the Phone
UPC - 044319302622
View all GE 29897GE1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
4. Connect the small end of the power adaptor into the POWER 7.5V AC jack on the back of the answerer. Plug the other end into an AC power outlet. The unit beeps once and is ready for setup or to answer calls with the default greeting and settings. 3 1 2 4 NOTE: The phone automatically defaults to touch-tone dialing. To change to pulse (rotary) dialing, see "Setting the Dialing Mode." If you don't know which type of service you have, check with the phone company. NOTE: The unit is properly installed if you pick up the handset and hear the dial tone. Otherwise, recheck all the installation steps. Wall Mounting the Phone 1. Carefully turn the handset hook 180° with a coin or screwdriver until it points upward. You need to do this so that the handset doesn't fall out of the base. 2. Plug the coiled cord into the handset. Plug the other end into the jack on the side of the base. 3. Place the handset in the base.