GE 5150-W Installation Instructions - Page 1

Glassbreak Sensors 5150 Series Shock Sensors Sentrol On-the-Glass Shock Sensors ❒X 5150-W ❒ 5150C-W ❒ 5150-M ❒ 5150C-M Quantity 5 Easy Installation and Range Verification • Mount directly on the glass • Two wire, self powered, solid state • Easy mounting with specially formulated 3M™ adhesive tape Applications The 5150 is rated for all types of glass, without adjustment. The sensor is rated for plate, wired, tempered and laminated glass up to 1/4". Mount sensor 1" from the Strike far opposite frame corner of glass with screwdriver handle 10' Maximum Coverage Sensor trips at panel or keypad verifying range for entire glass area Walk away with confidence Shock sensors are intrusion detection devices designed to detect a glass break big enough to reach, crawl, or walk through. Shock sensors aren't rated to detect cracks, bullet holes and other small holes, removing windows, or entry via glass cutting without breakage. All Glassbreak sensors should be Protected under patent 4,745,398 re. 33,807 and other patents backed up by interior protection. Laminated Glass will reduce the specified range. Test carefully to ensure maximum detection. Armor coated glass and plexiglass will reduce specified range by 50%, from a 10' radius to a 5' radius. This shock sensor is self powered and therefore will not effect battery life for wireless transmitters. 5150-W SENTROL , inc 503-692-4052 From U.S. and Canada: 800-547-2556 0 46188 06851 7