GE AJCH08ACC Owners Manual - Page 8
Controls—Control Knobs, MODE CONTROL, TEMP CONTROL
View all GE AJCH08ACC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Consumer Support Troubleshooting Tips Installation Instructions Care and Cleaning Operating Instructions Safety Instructions WARM About the controls on the air conditioner-models with control knobs. OOLER OFF LOW HEAT HIGH HEAT LOW FAN HIGH FAN LOW COOL HIGH COOL ER C COOLER OFF LOW LOW FAN COOL HIGH FAN HIGH COOL MODE CONTROL TEMP CONTROL Controls Mode Control HIGH COOL and LOW COOL provide cooling with different fan speeds. HIGH HEAT and LOW HEAT provide heating with different fan speeds. LOW FAN or HIGH FAN provides air circulation and filtering without cooling or heating. Temp Control The temp control is used to maintain the room temperature. The compressor will cycle on and off to keep the room at the same level of comfort. When you turn the knob to COOLER (blue) the indoor air will become cooler. Turn the knob to WARMER (red) and the indoor air will become warmer. NOTE: If you move the switch from a cool or heat setting to OFF or to a fan setting, wait at least 3 minutes before switching back to a cool or heat setting. A 3-minute delay is automatically provided on the Heat/Cool and Heat Pump models. Cooling/Heating Descriptions For Normal Cooling or Heating-Select HIGH COOL or HIGH HEAT with the thermostat at mid point. Heat Pump Models When the outdoor temperature is lower than 25°F., heat is provided by the electric heater in the air conditioner instead of by the heat pump. NOTE: The electric resistance heater in the 115-volt heat pump model operates during defrost when the outdoor coil temperature is below 36°F. It is not intended to provide full heat capability. For Maximum Cooling-Select HIGH COOL with the thermostat at maximum cool. For Maximum Heating-Select HIGH HEAT with the thermostat at maximum heat. For Quieter & Nighttime Cooling-Select 8 LOW COOL with the thermostat at mid point.