GE AJCQ08AC Owners Manual - Page 15
Installing, Through, The Wall
View all GE AJCQ08AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Installation Instructions INSTALLING THROUGH THE WALL Read these instructions completely and carefully. rl] PREPARE OPENING IN WALL Make certain a wall receptacle is available close to the hole location or make arrangements to install a receptacle. The cord length for the ll5-volt models is 72" to the right and 47" to the left. For the 230/208-volt models the cord length is 65" to the right and 39" to the left. [_SUPPORT REQUIREMENTS FOR AIR CONDITIONER The air conditioner wall case mag be installed with 1/4" min. extension out from the inside wall or with 1/4" min. extension out from the outside wall. The finished sides of the opening should be structural wall members. Lintel - Use a lintel in brick veneer and brick and block tgpes of wall to support the bricks or blocks above the opening. Do not allow the wall case to be used in lieu of a lintel. Flashing - Install flashing (drip rail) as shown to prevent water from dripping inside the wall and down the outside of the building. [_ SUPPORT REQUIREMENTS FOR AIR CONDITIONER Mortar between the case and the brick wall around the case may be undercut at about 45 ° for improved caulking. Inside __ Caulking/ Topof case Outside _ Undercut mortar Lintelan (if required) Caulkinc (onall 4 sides onthe outside andinside of the case) Plasterline Caulking (above below g (if desired) Roomside Flashing (driprail) m m i' 1/4" rain.extensionJ insidethewall from the trimmolding 15