GE CSB42WSKSS Quick Specs - Page 1

CSB42WSK GE Café™ Series 42" Built-In Side-By-Side Refrigerator DIMENSIONS AND INSTALLATION INFORMATION PRODUCT CLEARANCES These refrigerators are equipped with a 2-position door stop. The factory set 130° door swing can be adjusted to 90° if clearance to adjacent cabinets or walls is restricted. 130° DOOR SWING A B 90° DOOR SWING 23-7/8" BEHIND FRAME STAINLESS STEEL WRAPPED REFRIGERATORS Stainless Steel wrapped refrigerators have wrapped doors and grille panels, and beveled edges. These models are shipped ready for installation. 25-3/8" CASE DEPTH 41" CASE WIDTH C D D MODELS 42" A B 12-3/16" 16" C D 24" 4" Allow minimum clearances for Freezer door (Dimension A) and Fresh Food door (Dimension B) for a full 130° door swing and to allow for drawer removal. Four inch (4") minimum clearance is required when door swing is adjusted to 90°. If the 90° door stop position is used, drawer access is maintained, but drawer removal is restricted. *81-3/4" AT REAR *84" FROM FLOOR TO TOP FRAME 42" FRAME-TO-FRAME DEPTH INCLUDING HANDLES 27" *Shipping height *The front height may be adjusted from 83-1/2" to 84-1/2" by adjusting front and rear leveling legs a maximum of 1". For answers to your Monogram, GE Profile™ Series or GE® Series appliance questions, visit our website at geappliances.com or call GE Answer Center® service, 800.626.2000. Total volume and shelf area are calculated by the Association of Home Appliance Manufacturers' standards. Listed by Underwriters Laboratories Specification Revised 10/15