GE CYE22UELDS Use and Care Manual - Page 31

Remove The Freezer Door, Remove The Freezer, Basket Slides, Remove Freezer Basket, Installing

Page 31 highlights

INSTALLATION INSTRUCTIONS Installation Instructions INSTALLING THE REFRIGERATOR (Cont.) 6 REMOVE THE FREEZER DOOR A 3XOOWKHIUHH]HUGRRURSHQWRIXOOH[WHQVLRQ B Remove 3 attachment screws, located at the ERWWRPRQHDFKVLGHRIWKHIUHH]HUGRRUXVLQJ ´KH[VRFNHWGULYHU 3 Screws CAUTION Lifting Hazard Freezer door is heavy Use both hands to secure the door before lifting. C /LIWWKHIUHH]HUGRRU to disengage it from the slide mechanism The door can safely rest on the bottom. 'RQRWUHVWWKH door on any other surfaces to avoid scratches. 7 REMOVE FREEZER BASKET A Pull the lower basket and slide mechanism to full extension using both hands. B Remove the top IUHH]HUGUDZHUE\ fully extending the drawer then lifting up and out. C Remove the basket resting on the slides. ' Push the bottom basket slides back until the slide mechanism self retracts. 8 REMOVE THE FREEZER BASKET SLIDES 7KHIUHH]HUEDVNHWVOLGHVFDQEHUHPRYHGWR JDLQDQRWKHU´FOHDUDQFHWKURXJKDGRRUZD\ A 5HPRYHIUHH]HUGRRUDVVKRZQLQ6WHS B Remove the upper and lower baskets as shown in Step 7. C Remove the clip on the crossbar located along the right hand side of the rack and pinion gear assembly by sliding forward. Clip ' Remove crossbar by sliding to the right, then pull out and to the left. 1 2 E 5HPRYHWKHIRXU´KH[KHDGEROWVSHUVLGH and remove side supports. Hex head bolts ) Reverse the steps to assemble. When installing the crossbar, always put the hole on the right hand side. Align the left and Hole for clip right gears with the timing marks on the gears when inserting the crossbar. Always insert the crossbar in the right hang gear first and then the Timing mark left hand gear. 1 2 G ,QVHWWKHFOLSLQWRWKHFURVVEDUKROHORFDWHGRQ the right hand side. Clip 49-60764 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164

49-60764
31
INSTALLATION INSTRUCTIONS
REMOVE THE FREEZER DOOR
Remove 3 attachment screws, located at the
CAUTION
Lifting Hazard
Freezer door is heavy Use both hands to
secure the door before lifting.
to disengage it from
the slide mechanism
The door can safely
rest on the bottom.
door on any other
surfaces to avoid
scratches.
REMOVE THE FREEZER
BASKET SLIDES
Remove the upper and lower baskets as shown
in Step 7.
Remove the clip on the crossbar
located along the right hand
side of the rack and pinion gear
assembly by sliding forward.
Remove crossbar by sliding to the
right, then pull out and to the left.
and remove side supports.
Reverse the steps to assemble. When installing
the crossbar, always put the hole on the right
hand side.
Align the left and
right gears with the timing
marks on the gears when
inserting the crossbar. Always
insert the crossbar in the right
hang gear first and then the
left hand gear.
the right hand side.
A
A
B
B
C
C
6
8
3 Screws
REMOVE FREEZER BASKET
Pull the lower basket and slide mechanism to
full extension using both hands.
Remove the top
fully extending the
drawer then lifting
up and out.
Remove the basket
resting on the
slides.
Push the bottom
basket slides back
until the slide mechanism self retracts.
7
A
B
C
E
G
Installation Instructions
INSTALLING THE REFRIGERATOR (Cont.)
1
2
1
2
Hex head
bolts
Clip
Hole for clip
Timing
mark
Clip