GE FTP 1000 Installation Manual - Page 5
Installation - instructions
UPC - 782136714357
View all GE FTP 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
3 Installation Use the following instructions to install and wire your touchpad. Guidelines • Mount the touchpad in an environmentally controlled area (32 to 120°F or 0 to 49°C). • When mounting the touchpad, allow at least 3 inches below it for the swing-down cover. • Do not exceed the maximum available power. See the panel installation instructions for maximum available power. • Table 1 describes the power used by the touchpad. • Table 2 describes the maximum wire lengths allowed between the touchpad and the panel. Table 1. Touchpad power usage Current (mA) 75 50 12 Conditions Maximum alarm current with the buzzer sounding and the touchpad illuminated from a button press Typical operation Power saving mode (no panel AC power) Table 2. Maximum touchpad wire lengths Wire gauge (unshielded or shielded) 18 22 Max touchpad wire length between touchpad and panel 750 feet 300 feet Mounting plate installation To install the mounting plate, do the following: 1. Separate the mounting plate from the touchpad by first loosening the screw, then lift the touchpad away from the mounting plate (see Figure 1). Figure 1. Mounting plate screw Mounting plate screw