GE GBC12IAXLSS Use and Care Manual - Page 9
Installation Instructions, INSTALLING THE REFRIGERATOR, REFRIGERATOR LOCATION, CLEARANCES
UPC - 084691176459
View all GE GBC12IAXLSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Installation Instructions INSTALLING THE REFRIGERATOR REFRIGERATOR LOCATION • Do not install the refrigerator where the temperature will go below 60°F (16°C) because it will not run often enough to maintain proper temperatures. • Do not install the refrigerator where the temperature will go above 100°F (37°C) because it will not perform properly. • Install it on a floor strong enough to support it fully loaded. CLEARANCES Allow the following clearances for ease of installation, proper air circulation and electrical connections. Sides 2″ (5.08 cm) Top 2″ (5.08 cm) Back 2″ (5.08 cm) 3 LEVEL THE REFRIGERATOR The leveling legs have 3 purposes: 1) The leveling legs adjust so the door closes easily when opened about halfway. (The front of the refrigerator should be 1/4″ [6 mm] higher than the rear of the refrigerator.) 2) The leveling legs adjust so the refrigerator is firmly positioned on the floor and does not wobble. 3) The leveling legs serve as a stabilizing brake to hold the refrigerator securely in position during operation and cleaning. Turn the leveling legs clockwise to raise the refrigerator, counterclockwise to lower it. 1 PLUG IN THE REFRIGERATOR See the grounding information attached to the power cord. 2 PUT THE REFRIGERATOR IN PLACE Move the refrigerator to its final location. CAUTION: To avoid possible personal injury or property damage, the leveling legs must firmly touch the floor. 4 INSTALL TOE KICK A Transfer the slide plate as needed. B Using a Phillips screwdriver, secure the toe kick with the screws provided. Slide Plate Screw Screw 5 SET THE CONTROLS Set the controls to the recommended setting. 9