GE GDF540HSDSS Installation Instructions - Page 2

Installation Preparation PARTS SUPPLIED IN INSTALLATION PACKAGE: ■ Junction box cover and #10 hex-head screw ■ Hose clamp ■ Drain hose (approximately 78" long) ■ Drain hose hanger ■ 2 side trim pieces (some models) ■ Literature, samples and/or coupons ■ 2 mounting brackets for wood countertops or side cabinets Junction Box Cover #1#01h0ex screw Hex-Head Junction Box Screw 1/2" long Hose Clamp Drain Hose 756Dia12 #8 Hex-Head Mounting 923-02D Bracket Screws Drain Hose Hanger ■ 2 #8-18 x 5/8" Phillips special head screws, to secure dishwasher to underside of countertop or to side cabinets ■ 2 #8-18 hex head screws to secure brackets to washer tub frame Side Trim Pieces (on some models) Mounting Brackets #8 Phillips Special #H8eadPShcrielwlips s Spe 5/8" long Head Screws MATERIALS YOU WILL NEED: ■ Ferrule, compression nut and 90° elbow (3/8"NPT external thread on one end, opposite end sized to fit water supply) ■ Thread seal tape ■ UL-listed wire nuts (3) Materials Needed for New Installations: ■ Air gap for drain hose, if required ■ Waste tee for house plumbing, if applicable 90° Elbow, Hand Wire Nuts (3) 212Dia21 FCe7orm5ru6plreDeasiasni4don Nut Shut-Off Valve Thread Seal Tape 756Dia7 Hand Val7v5e6Dia6 Waste Tee Electrical Cable Hot Water Line (or Power Cord, if applicable) ■ Electrical cable or power cord ■ Screw-type hose clamps ■ Strain relief for electrical connection ■ Hand shut-off valve (recommended) ■ Water line-3/8" minimum copper tubing ■ GPF12L drain hose (12' long), if needed TOOLS YOU WILL NEED: ■ Phillips-head screwdriver ■ 1/4" and 5/16" nutdriver ■ 6" Adjustable wrench ■ Level ■ Carpenter's square 756Dia9 Hot Water Line 756Dia8 Hose Clamps Strain Relief Optional 12' Drain Hose Air Gap 756Dia1D3raiGnPF1H2Lose 10ft. 756DiaH1o1se Clamps Level Phillips-Head Screwdriver 1/4" and 5/16" Nutdriver Carpenter's 756Dia19Square ■ Measuring tape ■ Safety glasses ■ Flashlight 7155/166"DSociaket15 ■ Bucket to catch water when flushing the line ■ 15/16" socket (optional for skid removal) ■ Gloves 756Dia17 ■ Pliers For New Installations Only: Flashlight ■ Tubing cutter 756Dia20 756Dia16 Pliers Tubing Cutter 6" Adjustable Wrench 756Dia21 Safety Glasses 756Dia18 Measuring Tape 756Dia22 ■ Drill and appropriate bits ■ Hole saw set 2 756Dia23 Gloves Bucket 756Dia24 Drill and Bits Hole Saw Set 756Dia28