GE GDSS0KCXSS Installation Instructions - Page 3

Installation Instructions 4 INSTALL CENTER HINGE PIN (For models without freezer door) Install the hinge pin into the new hinge bracket. 6 INSTALL BOTTOM HINGE AND LEVELING LEG (For models with freezer door) (cont.) B Using a 5/16″ socket ratchet/driver, install the hinge bracket with leveling leg on the left side of the refrigerator. The pin will be toward the outside of the refrigerator. 5 REMOVE BOTTOM HINGE AND LEVELING LEG (For models with freezer door) A Using a 1/2″ socket ratchet/driver, remove the nut and hinge pin from the hinge bracket with leveling leg. Using a 5/16″ socket ratchet/driver, remove the screws from the bottom hinge bracket. These will be reinstalled on the other side. Bottom Hinge Bracket C Using a 5/16″ socket ratchet/driver, install the leveling leg bracket on the right side of the refrigerator. B Using a 5/16″ socket ratchet/driver, remove the screws from the leveling leg bracket on the other side. These will be reinstalled on the opposite side. Leveling Leg Bracket 6 INSTALL BOTTOM HINGE AND LEVELING LEG (For models with freezer door) A Using a 1/2″ socket ratchet/driver, install the hinge pin and nut in the opposite hole on the hinge bracket with leveling leg. 7 TRANSFER REFRIGERATOR AND FREEZER DOOR STOPS A Remove the door stop on right side of the bottom of the door by removing the two screws. B Move the plastic hinge hole thimble to the opposite hole. C Install the door stop on the left side, making sure to line up the screw holes in the door stop with the holes in the bottom of the door. A Bottom of Door (Right Side) Bottom of Door (Left Side) 3