GE GE06P06SAG Use and Care Manual - Page 5
Installing the water heater.
View all GE GE06P06SAG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Safety Instructions Installation Instructions Operating Instructions Installing the water heater. The location chosen for the water heater must take into consideration the following: Local Installation Regulations This water heater must be installed in accordance with these instructions, local codes, utility codes, utility company requirements or, in the absence of local codes, the latest edition of the National Electrical Code. It is available from some local libraries or can be purchased from the National Fire Protection Association, Batterymarch Park, Quincy, MA 02269 as booklet ANSI/NFPA 70. Location This water heater is designed to meet a wide range of applications. It fulfills a demand for a small water heater that can be installed in a limited space such as under countertops, in cabinets or in a closet. Locate the water heater in a clean dry area as near as practical to hot water fixtures, or close to the water faucet most frequently used. Locate the water heater in a clean dry area as near as practical to the area of greatest heated water demand. Long uninsulated hot water lines can waste energy and water. Place the water heater in such a manner that the thermostat and element access panels can be removed to permit inspection and servicing such as removal of elements or checking controls. The water heater and water lines should be protected from freezing temperatures. Do not install the water heater in outdoor, unprotected areas. CAUTION: The water heater should not be located in an area where leakage of the tank or connections will result in damage to the area adjacent to it or to lower floors of the structure. Where such areas cannot be avoided, it is recommended that a suitable catch pan, adequately drained, be installed under the water heater. A-Diameter of water B heater plus 2″ min. B-Maximum 2″ A NOTICE: Auxiliary catch pan MUST conform to local codes. Catch Pan Kits are available from the store where the water heater was purchased, or any water heater distributor. To open drain, line should be at least 3/4″ ID and pitched for proper drainage. Care and Cleaning Troubleshooting Tips Customer Service 5