GE GTD65EBSJWS Use and Care Manual - Page 12

GEAppliances.com, Problem, Possible Causes, What To - reviews

Page 12 highlights

Before you call for service... Troubleshooting Tips Save time and money! Review the charts on the following pages, or visit GEAppliances.com. You may not need to call for service. Problem Dryer doesn't start Dryer doesn't heat Dryer shakes or makes noise Greasy spots on clothes Lint on clothes Static occurs   Inconsistent drying times The Dry dryness level was chosen but load is still damp 12 Possible Causes Dryer is unplugged Fuse is blown/circuit breaker  is tripped What To Do ‡ 0DNHVXUHWKHGU\HUSOXJLVSXVKHGFRPSOHWHO\LQWR the outlet. ‡ &KHFNWKHKRXVHIXVHFLUFXLWEUHDNHUER[DQGUHSODFH fuse or reset breaker. NOTE: Most electric dryers use two fuses/breakers. Fuse is blown/circuit breaker is  WULSSHGWKHGU\HUPD\WXPEOH but not heat Gas service is off No heat temperature selected ‡ &KHFNWKHKRXVHIXVHFLUFXLWEUHDNHUER[DQGUHSODFH both fuses or reset both breakers. Your dryer may tumble if only one fuse is blown or one breaker is tripped. ‡ 0DNHVXUHJDVVKXWRIIDWGU\HUDQGPDLQVKXWRIIDUH fully open. ‡ 6HOHFWDQRWKHUKHDWVHWWLQJ Some shaking/noise is normal.  ‡ 0RYHGU\HUWRDQHYHQIORRUVSDFHRUDGMXVWOHYHOLQJOHJV Dryer may be sitting unevenly as necessary until even. Improper use of fabric softener Drying dirty items  with clean ones Clothes were not  completely clean ‡ )ROORZGLUHFWLRQVRQIDEULFVRIWHQHUSDFNDJH ‡ 8VH\RXUGU\HUWRGU\RQO\FOHDQLWHPV'LUW\LWHPVFDQ stain clean items and the dryer. ‡ 6RPHWLPHVVWDLQVZKLFKFDQQRWEHVHHQZKHQWKHFORWKHV are wet appear after drying. Use proper washing procedures before drying. Lint filter is full ‡ &OHDQOLQWVFUHHQEHIRUHHDFKORDG Improper sorting ‡ 6RUWOLQWSURGXFHUV OLNHFKHQLOOH IURPOLQWFROOHFWRUV (like corduroy). Static electricity can attract lint ‡ 6HHVXJJHVWLRQVLQWKLVVHFWLRQXQGHUStatic. Overloading ‡ 6HSDUDWHODUJHORDGVLQWRVPDOOHURQHV 3DSHUWLVVXHHWFOHIWLQSRFNHWV ‡ (PSW\DOOSRFNHWVEHIRUHODXQGHULQJFORWKHV No fabric softener was used  Over-drying  6\QWKHWLFVSHUPDQHQWSUHVV and blends can cause static ‡ 7U\DIDEULFVRIWHQHU ‡ %RXQFH® Fabric Conditioner Dryer Sheets have been approved for use in all GE Dryers when used in accordance with the manufacturer's instructions. ‡ 7U\DIDEULFVRIWHQHU ‡ $GMXVWVHWWLQJWRLess Dry or Damp Dry. ‡ 7U\DIDEULFVRIWHQHU Type of heat Load consists of a mixture of heavy and light fabrics ‡ $XWRPDWLFGU\LQJWLPHVZLOOYDU\DFFRUGLQJWRWKHW\SH of heat used (electric, natural or LP gas), size of load, types of fabrics, wetness of clothes and condition of exhaust ducts. ‡ :KHQFRPELQLQJKHDY\DQGOLJKWIDEULFVLQDORDG choose More Dry if you are using a sensor cycle. Exhaust system is blocked ‡ ,QVSHFWDQGFOHDQH[KDXVWV\VWHP

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

Troubleshooting Tips
Save time and money! Review the charts on the following pages,
or visit
GEAppliances.com
. You may not need to call for service.
Before you call for service…
Problem
Possible Causes
What To Do
Dryer doesn’t start
Dryer is unplugged
the outlet.
Fuse is blown/circuit breaker
is tripped
fuse or reset breaker.
NOTE:
Most electric dryers use
two fuses/breakers.
Dryer doesn’t heat
Fuse is blown/circuit breaker is
both fuses or reset both breakers. Your dryer may tumble
but not heat
if only one fuse is blown or one breaker is tripped.
Gas service is off
fully open.
No heat temperature
selected
Dryer shakes or
Some shaking/noise is normal.
makes noise
Dryer may be sitting unevenly
as necessary until even.
Greasy spots on clothes
Improper use of fabric softener
Drying dirty items
with clean ones
stain clean items and the dryer.
Clothes were not
completely clean
are wet appear after drying. Use proper washing procedures
before drying.
Lint on clothes
Lint filter is full
Improper sorting
(like corduroy).
Static electricity can attract lint
Static
.
Overloading
Static occurs
No fabric softener was used
®
Fabric Conditioner Dryer Sheets have been
approved for use in all GE Dryers when used in accordance
with the manufacturer’s instructions.
Over-drying
Less Dry
or
Damp Dry
.
and blends can cause static
Inconsistent
Type of heat
drying times
of heat used (electric, natural or LP gas), size of load,
types of fabrics, wetness of clothes and condition of
exhaust ducts.
The Dry dryness level
Load consists of a mixture
was chosen but load is
of heavy and light fabrics
choose
More Dry
if you are using a sensor cycle.
still damp
Exhaust system is blocked
12