GE GTD65EBSJWS Use and Care Manual - Page 6

Operating instructions - clothes dryer

Page 6 highlights

Operating instructions E Drying Cycles - Sensor cycles automatically determine fabric dryness. Timed cycles run for the selected time. Steam Dewrinkle For use with larger loads than Steam Refresh. Ideal for loads left in the dryer for an extended time. (on some models) Steam Dewrinkle is recommended for 9-13 garments NOTE: Steam cycles are not intended for use with towels. Important - the temperature setting must be set to HIGH and water must be turned on before running the Steam Refresh cycle. Steam Refresh (on some models) For slightly wrinkled dry garments. Significantly reduces wrinkles. After the Steam Refresh cycle, the unit will beep (if Signal is selected) and display "00." Steam Refresh is recommended for 3-5 garments NOTE: Steam cycles are not intended for use with towels. NOTE: A single extremely light fabric item may need to have an additional item included in the Steam Refresh cycle to achieve optimum results. Important - the temperature setting must be set to HIGH and water must be turned on before running the Steam Refresh cycle. Sanitize or Anti-Bacterial (depending on model) This option reduces certain types of bacteria including: Staphylococcus aureus, Pseudomonas aeruginosa and Klebsiella pneumoniae. The anti-bacterial process occurs when high heat is used during a portion of the drying cycle. NOTE: Do not use this cycle on delicate fabrics. Bulky Items For large coats, bed spreads, mattress covers, sleeping bags, and similar large/bulky items such as blankets, comforters, jackets, and small ruga. Towels/Sheets For most towels and linens. Cottons For cottons and most linens. Mixed Load For loads consisting of cottons and poly-blends. Casuals For wrinkle-free, permanent press, delicate items and knits. Delicates For delicate items, special-care fabrics and knits. Speed Dry For small loads that are needed in a hurry, such as sport or school uniforms. Can also be used if the previous cycle left some items damp, such as collars or waistbands. NOTE: On some models, the time remaining in the cycle will show counting down in the display. Jeans For jeans. Timed Dry Set the Cycle Selector at the desired drying time. Warm Up Provides 10 minutes of warming time to warm up clothes. Air Fluff Provides 10 minutes of tumbling time with no heat. F eDry Available for %XON\,WHPV7RZHOV6KHHWV&RWWRQV0L[HG/RDG-HDQV&DVXDOV and Delicates. When the eDry button is pressed, cycle settings change to reduce the total energy consumption of the selected sensor cycle. NOTE: Cycle times will change when eDry is selected. The eDry option will default to on for Cottons. For optimal energy savings, turn eDry on. For optimal drying times, turn eDry off. NOTE: Energy savings will vary across loads and cycles. 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

6
Drying Cycles
-
Sensor cycles automatically determine fabric dryness.
Timed cycles run for the selected time.
Steam Dewrinkle
For use with larger loads than
Steam Refresh.
Ideal for loads left in the dryer for an extended time.
(on some models)
Steam Dewrinkle is recommended for 9-13 garments
NOTE:
Steam cycles are not intended for use with towels.
Important - the temperature setting must be set to HIGH and water must be turned on
before running the Steam Refresh cycle.
Steam Refresh
For slightly wrinkled dry garments. Significantly reduces wrinkles. After the
Steam Refresh
cycle,
(on some models)
the unit will beep (if Signal is selected) and display “00.”
Steam Refresh is recommended for 3-5 garments
NOTE:
Steam cycles are not intended for use with towels.
NOTE:
A single extremely light fabric item may need to have an additional item included in
the
Steam Refresh
cycle to achieve optimum results.
Important - the temperature setting must be set to HIGH and water must be turned on
before running the Steam Refresh cycle.
Sanitize
or
This option reduces certain types of bacteria including: Staphylococcus aureus, Pseudomonas
Anti-Bacterial
aeruginosa and Klebsiella pneumoniae. The anti-bacterial process occurs when high heat is used
(depending
during a portion of the drying cycle.
on model)
NOTE:
Do not use this cycle on delicate fabrics.
Bulky Items
For large coats, bed spreads, mattress covers, sleeping bags, and similar large/bulky items such as
blankets, comforters, jackets, and small ruga.
Towels/Sheets
For most towels and linens.
Cottons
For cottons and most linens.
Mixed Load
For loads consisting of cottons and poly-blends.
Casuals
For wrinkle-free, permanent press, delicate items and knits.
Delicates
For delicate items, special-care fabrics and knits.
Speed Dry
For small loads that are needed in a hurry, such as sport or school uniforms. Can also be used if the previous
cycle left some items damp, such as collars or waistbands.
NOTE:
On some models, the time remaining in
the cycle will show counting down in the display.
Jeans
For jeans.
Timed Dry
Set the Cycle Selector at the desired drying time.
Warm Up
Provides 10 minutes of warming time to warm up clothes.
Air Fluff
Provides 10 minutes of tumbling time with no heat.
eDry
Available for
and
Delicates
. When the
eDry
button is
pressed, cycle settings change to reduce the total energy consumption of the selected sensor cycle.
NOTE:
Cycle times will
change when
eDry
is selected.
The
eDry
option will default to
on
for
Cottons
. For optimal energy savings, turn
eDry
on
.
For optimal drying times, turn
eDry
off
.
NOTE:
Energy savings will vary across loads and cycles.
E
F
Operating instructions