GE GTL22JBPBS Owners Manual - Page 19

Transfer Top Hinge To, The Left, Remove The Refrigerator, Remove The Freezer Door

Get GE GTL22JBPBS PDF manuals and user guides View all GE GTL22JBPBS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

Installation Instructions 1 REMOVE THE FREEZER DOOR Tape the door shut with masking tape. 2 REMOVE THE REFRIGERATOR DOOR Tape the door shut with masking tape. Remove the center hinge pin with a 3/4″ socket. Hinge Pin Remove the hinge cover on top of the freezer door (on some models). Remove the two screws, then lift the hinge straight up to free the hinge pin from the socket in the top of the door. Top Hinge Tape the door shut with masking tape. Remove the tape and tilt the door away from the cabinet. Lift it off the center hinge pin. Set the door on a non-scratching surface with the inside up. Remove the tape and tilt the door away from the cabinet. Lift the door straight off the bottom hinge bracket. Set the door on a non-scratching surface, with the inside up. CAUTION: Do not let door drop to the floor. To do so could damage the door stop. 3 TRANSFER TOP HINGE TO THE LEFT Interchange hinge and screws at top right with screws at the top left of cabinet. Do not tighten screws on hinge side at this time. 19 Downloaded from www.Manualslib.com manuals search engine

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
19
Installation Instructions
Hinge Pin
Top Hinge
TRANSFER TOP HINGE TO
THE LEFT
Interchange hinge and screws at top right with
screws at the top left of cabinet.
Do not tighten screws on hinge side at this time.
3
REMOVE THE REFRIGERATOR
DOOR
Tape the door shut with masking tape.
Remove the center hinge pin with a 3±4
″
socket.
Remove the tape and tilt the door away from the
cabinet. Lift the door straight off the bottom hinge
bracket.
Set the door on a non-scratching surface, with the
inside up.
CAUTION:
Do not let door drop to the floor.
To do so could damage the door stop.
2
REMOVE THE FREEZER DOOR
Tape the door shut with masking tape.
Remove the hinge cover on top of the freezer door
(on some models).
Remove the two screws, then lift the hinge straight
up to free the hinge pin from the socket in the top
of the door.
Tape the door shut with masking tape.
Remove the tape and tilt the door away from the
cabinet. Lift it off the center hinge pin.
Set the door on a non-scratching surface with
the inside up.
1
Downloaded from
www.Manualslib.com
manuals search engine