GE GTL22JBPBS Owners Manual - Page 22

Transfer Freezer Door, Handle To The Right, Rehang The Freezer Door, Cont.

Page 22 highlights

Installation Instructions REVERSING THE DOOR SWING (CONT.) 8 TRANSFER FREEZER DOOR HANDLE TO THE RIGHT Remove the screws holding the handle to the top and bottom of the door. Remove handle. 9 REHANG THE REFRIGERATOR DOOR Lower the refrigerator door onto the bottom hinge pin. Move the plug button on the right side of the door to the handle screw hole on the left side. Reattach the handle on the opposite side using the holes closest to the edge of the door. Straighten the door and line it up with the center hinge bracket. Reinstall the center hinge pin with a 3/4″ socket. Turn it until it extends through the hinge bracket and into the door. Hinge Pin Center Hinge Bracket 10 REHANG THE FREEZER DOOR Lower the freezer door onto the center hinge pin. Downloaded from www.Manualslib.com manuals search engine Center Hinge Pin Lift the top hinge so the pin fits into the door socket. Support the door on the handle side and make sure the door is straight and the gap between the doors is even across the front. While holding the door in place, tighten the top hinge screws. 22

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

22
REHANG THE REFRIGERATOR
DOOR
Lower the refrigerator door onto the bottom
hinge pin.
Straighten the door and line it up with the center
hinge bracket.
Reinstall the center hinge pin with a 3±4
socket.
Turn it until it extends through the hinge bracket
and into the door.
9
TRANSFER FREEZER DOOR
HANDLE TO THE RIGHT
Remove the screws holding the handle to the top
and bottom of the door. Remove handle.
Move the plug button on the right side of the door
to the handle screw hole on the left side.
Reattach the handle on the opposite side using the
holes closest to the edge of the door.
8
REHANG THE FREEZER DOOR
Lower the freezer door onto the center hinge pin.
Lift the top hinge so the pin fits into the door
socket.
Support the door on the handle side and make
sure the door is straight and the gap between the
doors is even across the front. While holding the
door in place, tighten the top hinge screws.
10
Center Hinge Pin
REVERSING THE DOOR SWING
(CONT.)
Installation Instructions
Center Hinge
Bracket
Hinge Pin
Downloaded from
www.Manualslib.com
manuals search engine