GE GTS18JBPWW Use and Care Manual - Page 16
Installation Instructions, REVERSING THE DOOR SWING, TRANSFER CENTER HINGE, BRACKET TO THE LEFT
UPC - 084691078142
View all GE GTS18JBPWW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Installation Instructions REVERSING THE DOOR SWING (CONT.) 5 TRANSFER CENTER HINGE BRACKET TO THE LEFT Remove the center hinge bracket by removing the three Torx® screws. NOTE: Keep these screws with the hinge bracket. They are long screws and will be used when installing the hinge on the other side. On some models, you will need to remove the colormatched caps from the screw heads before you can remove the screws. Use the edge of a thin flat blade to gently pry the caps off the screw heads. (A putty knife works well for this.) Cover the blade with tape to prevent scratching the paint. Remove the three Torx® screws from the center left side of the cabinet. Screw them into the holes on the right side. Place the center hinge bracket over the holes at the center left side of the cabinet. Insert and tighten the three long screws. Replace the caps by snapping them over the screws with your finger. Screw Cap 6 TRANSFER DOOR STOPS On each door, move the metal door stop from the right to the left. Move any screws from the left to the right. Door Stop Door Stop 7 TRANSFER REFRIGERATOR DOOR HANDLE TO THE RIGHT Plastic handle: 3 Remove the plug button by carefully prying under the edge with a putty knife. Remove the exposed screw holding the handle. Remove 2 the two screws holding the handle to the top of the door. Handle Plug 1 Handle Plug Stainless steel handle (on some models): Remove the two screws holding the handle to the top of the door. Loosen the 1 set screw with the 3/32″ Allen wrench Fastener (supplied) and remove the handle. Remove 2 the handle fastener with the 3/16″ Allen wrench (supplied). Transfer the fastener to the right side and move the plug button to the left side of the refrigerator door. 3 Plug Button After removing the handle: Move the small plug buttons from the top right side of the door top and insert them into the holes on the opposite side. Small Plug Buttons Move the large plug button from the left edge of the door and insert it into the hole on the opposite side. Plug Button Left Side Right Side 16