GE GTWS8650DWS Use and Care Manual - Page 8

Bulk Detergent Tank, Single Wash Detergent Dispenser, Set the Bulk Detergent Cup Amount Preference - manual

Page 8 highlights

About washer features. Bulk Detergent Tank Single Wash Detergent Dispenser Bulk Detergent Tank The bulk detergent tank holds over a gallon (140 ounces or 4100 ml) of liquid bulk detergent. After filling the tank, press the Detergent Tank On button to turn on its light and designate bulk (rather than manual) detergent dispense. The Tank Levels lights (1-5) indicate how much detergent is left. An empty tank is shown by a single red light. A full (or nearly full) tank is shown by 5 lights. NOTE: If you press Start when the tank is empty, the Detergent Tank On and the red light will blink. A beep will also sound if Variable Signal is on. The Detergent Cup Amount lights indicate if a Low, Medium, or High amount will be dispensed. See the Bulk Tank Special Functions Option 1: Set Concentration Settings on page 10 to understand how the Low, Medium, and High amounts are established. Detergent will be automatically dispensed at the optimum time at the beginning of each fill cycle. Set the Bulk Detergent Cup Amount Preference When the Detergent Tank On light is on, pressing the Detergent Cup Amount button will set the Detergent Cup Amount lights (1, 2, or 3). Level 1 will distribute the standard amount minus 25%. Level 2 will distribute the standard amount. Level 3 will distribute the standard amount plus 25%. Examples: Factory default standard amount is 1.5 oz (44 ml) (Concentration Setting ). Concentration Setting  If Detergent Cup Amount shows 3 lights then 1.9 oz (55 ml) will be dispensed. 3 lights: 1.9 oz. If Detergent Cup Amount shows 2 lights then 1.5 oz (44 ml) will be dispensed. 2 lights: 1.5 oz. If Detergent Cup Amount shows 1 light then 1.1 oz (33 ml) will be dispensed. 1 light: 1.1 oz. NOTE: Each cycle knob position defaults to a different Detergent Cup Amount (including 0 if no detergent is used). If you change the Soil setting, the Detergent Cup Amount may change. You can then manually change the Detergent Cup Amount, but your change will not be saved when you leave this knob position or if you set a My Settings. Single Wash Detergent Dispenser If you prefer to manually add either powder or liquid detergent to the next wash cycle, pour it in the left front opening and make sure the Tank On light is off (press button if light is on). Most detergent will immediately enter the tub. The washer will flush water through this opening just prior to the fill cycle to add any detergent that did not fall into the tub. NOTE: Do not put detergent tablets in the single wash detergent dispenser. Detergent tablets should be added to the bottom of the washer basket before clothes are placed inside. 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

8
About washer features.
Bulk Detergent Tank
The bulk detergent tank holds over a gallon (140
ounces or 4100 ml) of liquid bulk detergent. After
filling the tank, press the
Detergent
Tank On
button
to turn on its light and designate bulk (rather than
manual) detergent dispense.
The
Tank Levels
lights (1-5) indicate how much
detergent is left. An empty tank is shown by a single
red light. A full (or nearly full) tank is shown by 5
lights.
NOTE:
If you press
Start
when the tank is empty, the
Detergent Tank On
and the red light will blink.
A beep will also sound if
Variable Signal
is on.
The
Detergent Cup Amount
lights indicate if a
Low
,
Medium
, or
High
amount will be dispensed.
See the
Bulk Tank Special Functions Option 1: Set
Concentration Settings
on page 10 to understand
how the
Low
,
Medium
, and
High
amounts are
established.
Detergent will be automatically dispensed at the
optimum time at the beginning of each fill cycle.
Bulk Detergent Tank
Single Wash Detergent Dispenser
If you prefer to manually add either powder or liquid
detergent to the
next
wash cycle, pour it in the left
front opening and make sure the
Tank On
light is
off
(press button if light is on). Most detergent will
immediately enter the tub. The washer will flush
water through this opening just prior to the fill cycle
to add any detergent that did not fall into the tub.
NOTE:
Do not put detergent tablets in the single
wash detergent dispenser.
Detergent tablets should be added to the bottom
of the washer basket before clothes are placed
inside.
Single Wash Detergent Dispenser
Set the Bulk Detergent Cup Amount Preference
When the
Detergent Tank On
light is on, pressing the
Detergent Cup Amount
button will set the
Detergent
Cup Amount
lights (1, 2, or 3).
Level 1 will distribute the standard amount minus 25%.
Level 2 will distribute the standard amount.
Level 3 will distribute the standard amount plus 25%.
Examples:
Factory default standard amount is 1.5 oz (44 ml) (
Concentration Setting
¶¸
).
If
Detergent Cup Amount
shows 3 lights then 1.9 oz (55 ml) will be dispensed.
If
Detergent Cup Amount
shows 2 lights then 1.5 oz (44 ml) will be dispensed.
If
Detergent Cup Amount
shows 1 light then 1.1 oz (33 ml) will be dispensed.
NOTE:
Each cycle knob position defaults to a different
Detergent Cup
Amount
(including 0 if no
detergent is used). If you change the
Soil
setting, the
Detergent Cup
Amount
may change. You can
then manually change the
Detergent Cup Amount
, but your change will
not
be saved when you leave
this knob position or if you set a
My Settings
.
¶¸
1.9 oz.
1.5 oz.
1.1 oz.
Concentration
Setting
3 lights:
2 lights:
1 light: