GE GUD27ESSJWW Installation Instructions - Page 11

Installation Instructions 9 MOBILE OR MANUFACTURED HOME INSTALLATION • Installation MUST conform to the MANUFACTURED HOME CONSTRUCTION & SAFETY STANDARD, TITLE 24, PART 32-80 or, when such standard is not applicable, with AMERICAN NATIONAL STANDARD FOR MOBILE HOME, ANSI/NFPA NO. 501B. • The appliance MUST be vented to the outdoors with the termination securely fastened to the mobile home structure. • The vent MUST NOT be terminated beneath a mobile or manufactured home. • The vent duct material MUST BE METAL. • KIT 14-D346-33 MUST be used to attach the appliance securely to the structure. ‡ 7KH YHQW 0867 127 EH FRQQHFWHG WR DQ\ RWKHU GXFW  YHQW  RU chimney. • Do not use sheet metal screws or other fastening devices which extend into the interior of the exhaust vent. • See section 2 for electrical connection information. 10 ALCOVE OR CLOSET INSTALLATION µ 0" 0" 0" 0" µ DOOR VENTILATION OPENING (27" MODELS) $PLQLPXPRIVTXDUHLQFKHVRIRSHQLQJHTXDOO\GLYLGHG at top and bottom, is required. Air openings are required to be unobstructed when a door is installed. A louvered door with equivalent air openings for the full length of the door is acceptable. When louvers or registers are placed in door openings, the IUHHDLURSHQLQJVRIWKHORXYHUVRUUHJLVWHUVPXVWHTXDO square inches. DOOR VENTILATION OPENING (24" MODELS) 27" Model 6T,Q 6T,Q A minimum of 72 square inches of opening is required. Air openings are required to be unobstructed when a door is installed. A louvered door with equivalent air openings for the full length of the door is acceptable. When louvers or registers are placed in door openings, the free air openings of the louvers or registers must equal 72 square inches. 48 Sq. In. • If your appliance is approved for installation in an alcove or closet, it will be stated on a label on the appliance back. ‡7235(9(17/$5*($0281762)/,17$1'02,6785( )520$&&808/$7,1*$1'720$,17$,1'5