GE GYE18JBLTS Installation Instructions - Page 17
Installation, Refrigerator, Instructions
View all GE GYE18JBLTS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Installation Instructions Refrigerator Questions? Call 800.GE.CARES (800.432.2737) or visit our Website at: GEAppliances.com In Canada, call 1.800.561.3344 or visit our Website at: www.GEAppliances.ca BEFORE YOU BEGIN Read these instructions completely and carefully. • IMPORTANT ³ Observe all governing codes and ordinances. Save these instructions for local inspector's use. • Note to Installer - Be sure to leave these instructions with the Consumer. • Note to Consumer - Keep these instructions for future reference. • Skill level - Installation of this appliance requires basic mechanical skills. • Completion time - Refrigerator Installation 20 minutes Water Line Installation 30 minutes • Proper installation is the responsibility of the installer. • Product failure due to improper installation is not covered under the Warranty. TOOLS YOU MAY NEED Adjustable Wrench Ȓµ and ȓµSocket Ratchet/Driver 1/4" Outer Diameter Compression Nut and Ferrule (sleeve) (ice maker models only) Phillips-Head Screwdriver 3/32", 1/8" & 3/16" Allen Wrenches PREPARATION MOVING THE REFRIGERATOR INDOORS If the refrigerator will not fit through a doorway, the refrigerator door and freezer drawer or door can be removed. • To remove the refrigerator door, see Step 1 in the Reversing the Door Swing section. • To remove the freezer drawer, see the Removing the Freezer Drawer section. WATER SUPPLY TO THE ICE MAKER AND DISPENSER If the refrigerator has an ice maker, it will have to be connected to a cold water line. A GE water supply kit (containing tubing, shutoff valve, fittings and instructions) is available at extra cost from your dealer, by visiting our website at GEAppliances.com (in Canada at www.GEAppliances.ca) or from Parts and Accessories, 800.626.2002 (in Canada 1.800.661.1616). 1/8" Drill Bit and Electric or Hand Drill Pencil Wire Cutters Torx T20, Driver Tape Measure 1/4" Nut Driver Level 17