GE GYE18JBLTS Installation Instructions - Page 22
Reinstalling The French Doors
View all GE GYE18JBLTS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Installation Instructions REINSTALLING THE FRENCH DOORS (on some models) IMPORTANT NOTES When replacing the french doors: • Read the instructions all the way through before starting. CAUTION Lifting Hazard. Single person lift can cause injury. Use assistance when handling, moving or lifting the refrigerator doors. NOTE: When moving door, to prevent damage to door and electronics carefully place the door in a proper location. WARNING To eliminate the risk of electric shock or injury during installation, you must first unplug the refrigerator before proceeding. Failure to follow these instructions can result in electrical shock. 2 REHANGING THE RIGHT DOOR A. Lower the refrigerator door onto the right hinge pin. B. Make sure the door is aligned with the cabinet. Attach the hinge to the top of the cabinet loosely with bolts removed earlier. C. Make sure the gasket on the door is flush against the cabinet and is not folded. Tighten the bolts to 60 lb/in. 1 REINSTALLING CENTER HINGE BRACKETS AND HINGES A. Using a 5/16" socket/ratchet driver, reinstall the bolts and center hinge brackets to the cabinet. B. Using a 1/4" Allen wrench, reinstall the 2 hinge pins into the hinge brackets. D. Replace the right hinge cover on top of the refrigerator using a Phillips screwdriver. 3 REHANGING THE LEFT DOOR A. For NON Ice and Water Models Only: Pass the wire through the slot in the hinge. Place the hinge pin into the top of the door. B. Lower the refrigerator door onto the left hinge pin. 22