GE JASRM24945 Instruction Manual - Page 5
Direct Code Entry, Surround Sound Feature
View all GE JASRM24945 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Surround Sound Feature The surround sound feature may be turned ON/OFF by pressing the SURR ON•OFF button. 1. Press the SURR MODE button until the desired mode is found. 2. Press DELAY+ or DELAY- to achieve the desired delay affect. 3. Press the DSP ON•OFF button to turn DSP (Digital Sound Processor) ON or OFF. 4. Press the DSP mode button until the desired effect is achieved. 5. Press the TEST button to listen to speaker levels. 6. Press FRONT, CENTER, or REAR buttons to select speakers. 7. Press the LEVEL+ or LEVELbuttons to adjust speaker levels. Direct Code Entry 1. Press and hold the CODE SEARCH button until the red indicator stays on, then release the CODE SEARCH button. 2. Press and release the desired device button (TV, VCR, etc.). The red indicator blinks, then stays lit. 3. Enter the 3 digit code from the code tables (on separate sheet). Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes. 4. With your device on, press ON•OFF. If the device turns off, no further programming is required. Note: If some buttons do not operate your equipment, try one of the other codes for your brand. Write your codes down here for easy reference later. Type Type stored Code TV TV VCR SAT CBL AUDIO DVD 8 9