GE JASRM24945 Instruction Manual - Page 9
Insert the Batteries in the Remote, Set the ITEM # for the Remote, Notes
View all GE JASRM24945 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Using the FIND IT Locator Functions You can use the FIND IT remote to find the Keyfob, whether it has keys attached, or if it's attached to something else. Or you can use the Keyfob to find your misplaced Remote. The Keyfob and the Remote are a "set" and need to be programmed to find each other. Here are the simple steps. 1. Insert the Batteries in the Remote Insert 2 AAA alkaline batteries in the battery compartment on the back of the Remote. Observe the + and - notations. FIND For setup and for finding up to 6 items. 16 FIND IT Locator Functions, cont. 2. Set the ITEM # for the Remote NOTE: The remote is automatically set as #1. This means to find the lost Remote, just press #1 on the Keyfob and the Remote should start beeping. Wait about 20 seconds after inserting the batteries before testing it. Should the Remote not automatically default to #1 or if you wish to change the Remote to Item #2, 3, 4, 5, or 6, then follow the steps below. To change the setting: a. Press and hold the FIND button, and then press and release the #1 button on the Remote. The Remote beeps and the LED continues to blink. b. While holding the FIND button, press the #1, 2, 3, 4, 5, or 6 on the Remote's keypad (whatever number you wish to assign to the Remote) and release both buttons. The LED blinks and the Remote beeps the number of times corresponding to the number you pressed on the Remote. The Remote is now assigned as that number. c. Test it by pressing (on the Keyfob) the number that you just set the Remote to. For example, if you pressed the #6 in step "b" above then press #6 on the Keyfob. The Remote should start beeping. Notes: A Keyfob or a Remote cannot find a Remote or a Keyfob that is set to the same code as itself. After setting the ITEM #, wait about 20 seconds before testing the FIND IT Remote. Removing the batteries will cause your Remote to lose its setting (it will revert to ITEM # 1). If you want to change its settings, you will need to reprogram it using the steps above. 17