GE JGP333SETSS Installation Instructions - Page 20

Installation Instructions PREPARING THE OPENING 1 MAINTAIN THE FOLLOWING MINIMUM CLEARANCE DIMENSIONS 13″ MAX. Depth of unprotected overhead cabinets 36c3u″/4tMMoIuNIN.t .toclesaidreanwcaellforonmthe right of the unit 30″ MIN. clearance from countertop to unprotected overhead surface 18″ MIN. height from countertop to nearest cabinet on either side of unit 3-3/4″ MIN. clearance from cutout to side wall on the left of the unit NOTE: All gas cooktop models require 7/16″ free area below cooktop height to combustible material. 2 OVERALL COOKTOP DIMENSIONS 30″ Cooktop 21″ (21-1/2″ Max. for Glass Top models) 3″ 19-3/8″ 28-1/4″ 4 RECOMMENDED GAS SUPPLY LOCATION FROM BACKWALL 1" Min. From Backwall Recommended gas supply location 13-1/4″ From Cutout Center Line 5 MAKE SURE WALL COVERINGS, COUNTERTOP AND CABINETS AROUND COOKTOP CAN WITHSTAND HEAT (UP TO 200°F) GENERATED BY COOKTOP Wall covering, cabinets and countertop must withstand heat up to 200°F 3 CUTOUT DIMENSIONS OF COUNTERTOP To ensure accuracy, it is best to make a template when cutting the opening in the counter. 2-1/4" Min. Between cutout and the wall behind the cooktop 28-1/2" length of cut 19-5/8" width cut 14-1/4″ 2-1/2" Min. from front edge of cutout and front edge of countertop 4