GE JM250DFCC Installation Instructions - Page 11

GEAppliances.com Cook and Hold Your new control has a cook and hold feature that keeps cooked foods warm for up to 3 hours after the cooking function is finished. This feature can be used only at the end of a timed baking cycle which has an automatic stop. To activate this feature, follow the steps below. Press the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF. Press the COOKING TIME pad. The display will show Hld OFF. Press the COOKING TIME pad again to activate the feature. The display will show Hld ON. Press the START pad to activate the cook and hold feature and leave the control set in this special features mode. Changing the Speed of the Increase or Decrease Pads As you use the INCREASE or DECREASE pads when setting a time or temperature, you may notice the display changes slowly. This special feature allows you to change the speed. To set the speed you prefer, follow the steps below. Press the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF. Press the INCREASE pad. The display will show you a set speed between 1 and 5. Press the INCREASE pad to increase the speed up to the number 5. Press the DECREASE pad to decrease the speed down to the number 1. Press START to activate the setting and leave the control set in this special features mode. 11