GE JRP20SKSS Installation Instructions - Page 2
Prepare Opening - 24
UPC - 084691131786
View all GE JRP20SKSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
PREPARE OPENING Fig. 1 - SINGLE OVEN NOTE: Locate an approved junction box in the suggested location, a minimum of 23 7/8" above the runners. Be sure the oven support is solid enough to support 90 pounds. Also be sure the oven support is level and straight. There is no way to level the oven after installation. If a solid bottom is used instead of runners, a 6" x 10" rectangle must be cut out of the bottom (See Fig. 1) for optimum performance and proper air circulation. DIMENSIONS A. Cabinet Width - 24" B. Cutout Width - 22 1/2" C. Cutout Height - 27 5/8" Min. 28 1/8" Max. D. Cutout Depth - 23 1/2" Min. E. Cutout Location - 32 1/2" H. Overall Height - 28 1/4" W.Overall Width - 23 3/4" 9" MIN. 2" x 4" OR EQUIVALENT RUNNERS c c 7" 6" 24" 10" 11" 24" MIN. 10" A Junction Box Locations 2" x 4" or Equivalent Runners on 11" Centers B D W 20" H 20" 23 7/8" Min. C 5" Allow 7/8" for overlap of oven E over all edges of cutout. Allow minimum of 20" for clearance to adjacent corners, drawers, or walls, etc. Fig. 2 - DOUBLE OVEN NOTE: Locate an approved junction box in the suggested location, a minimum of 48" above the runners. Be sure the oven support is solid enough to support 155 pounds. Also be sure the oven support is level and straight. There is no way to level the oven after installation. If a solid bottom is used instead of runners, a 6" x 10" rectangle must be cut out of the bottom (See Fig. 2) for optimum performance and proper air circulation. DIMENSIONS 9" MIN. 2" x 4" OR EQUIVALENT RUNNERS c c 7" 6" 24" 10" 11" 24" MIN. ALLOW 7/8" FOR OVERLAP OF OVEN OVER ALL EDGES OF CUTOUT 10" A JUNCTION BOX LOCATION A. Cabinet Width - 24" Min. B. Cutout Width - 22 1/2" C. Cutout Height - 48 1/8" D. Cutout Depth - 23 1/2" Min. E. Cutout Location - 12 3/4" Min. H. Overall Height - 48 3/4" W. Overall Width - 23 3/4" B W D 48" MIN. C H E 20" MINIMUM CLEARANCE TO ADJACENT CORNERS, DRAWERS, OR WALLS, ETC. 2" x 4" or EQUIVALENT RUNNERS 2