GE JTP30SPSS Quick Specs - Page 1

out width /2'' MIN. /8'' MAX. JTP30SP 5 GE® 30" Built-In Single Wall Oven 23-1/2'' MIN. DimensCiountsoauntddInesptatlhlation InfJourmncattiioonn(in inches) KW Rating box location A 240V 4.5 208V 3.4 BreakeBr Size 240V 20 Amps 208V27-12/40 'A' mMpIsN. 27-5/16'' MAX. 22'' MIN. Most 30C" Wuatoll uCatbhineetisgchatn be used with this unit. Note: These ovens are not approved for stackable installations. Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating. Suitable bracing to support runners Door haRndelecporomtrumdeesn3d" ferodm door face. Cabinets apnladceddratwoceuarvstoooidunitnatdleojarfcceearnetntico4e5n°waitnhdt9h0e°hwaanldlsles.hould be Installation In3fo2rm-1a/t2io"n: Before installing, consult installation infsrtorumctiofnlos oparcked with product for current dimensional data. Electric wall ovens are not approved for installation with a plug and receptacle. They must be hard wired in accordance with installation instructions. 30 Side-by-side installations require at least 2" between cutouts. Cutout width 28-1/2'' MIN. 28-5/8'' MAX. 5 CL 2 x 4 or equivalent runners 29-3/4 23-1/2'' MIN. Cutout depth Junction box location A B Conduit 27-1/4'' MIN. 22'' MIN. C 48-1/2" 27-5/16'' MAX. Cutout height 21-5/8" over centerline of cabinet (must support 275 lbs.) Recommended cutout location 32-1/2" 21 from floor Allow minimum of 21'' for clearance 30 to adjacent corners, drawers, walls, or etc. A=Allow 1" overlap of oven over top and bottom edges of cutout. B=Allow 11/16"-3/4" for overlap of oven over side edges of cutout. C=28-1/4" without trim and 28-3/4" with trim. Suitabl bracin to suppo runner es of cutout. dges of cutout. For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000. Listed by Underwriters Laboratories Specification Created 5/09 320229