GE JTP30SPSS Quick Specs - Page 2
Built-In Single Wall Oven - dimensions
UPC - 084691194859
View all GE JTP30SPSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
JTP30SP GE® 30" Built-In Single Wall Oven Optional Undercounter Installation Dimensions (in inches) 3-1/4 3-1/2" MIN. Free space Conduit 48-1/2" 2 (two) 90°elbows & sufficient pipe to connect in adjacent cabinet Junction box for oven 30" built-in oven 1/2" Black iron pipe Pressure regulator Union Shut-off valve 3/4" Support Junction box in adjacent cabinet for cooktop hook-up 22 Power cord for cooktop 4" To 4-1/2" Right cabinet side Side View This installation is to achieve minimum gap between bottom of countertop and control panel. Note: For this installation, the bottom trim will not be flush with a typical 4" toe kick. Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating. Note: 36" radiant and induction cooktops are approved for use over GE 30" single wall ovens only. 30" radiant and induction cooktops are approved for use over GE 30" and GE 27" single wall ovens. Refer to cooktop and wall oven installation information packed with products for current dimensional data. Installation Information: Before installing, consult installation instructions packed with product for current dimensional data. 30" Oven W/ Rad. Cktp. Optional Undercounter Installation With Electric Cooktop Dimensions (in inches) 1-1/2" Typical countertop 1-1/2" MIN. Free space 30-3/4" to 31-3/4" 27-1/4" MIN. 27-5/16" MAX. Cutout height Power cord Junction box(s) for oven & radiant cooktop 22" from floor 36" Typical Countertop height 22 4-3/4" to 5-1/4" Add suitable filler to match adjacent cabinets when needed to maintain toe kick alignment Side View Undercounter Installation Gas or electric cooktops may be installed over this oven. See cooktop installation instructions for cutout size. See label on top of oven for approved cooktop models. Gas (including the pressure regulator) and 25 Junction box Gas electrical connections for gas cooktop must location connection be located in an adjacent accessible location. 240/208V 5 For a 30" gas cooktop, the connections are more conveniently made to the right. 23-1/2" MIN. Cutout depth 120 Volt Outlet 1-1/2" Countertop Top and/or side fillers may be necessary if unit is positioned between existing cabinets 28-1/2'' MIN. 28-5/8'' MAX. 27-1/4'' MIN. 27-5/16'' MAX. Cutout height Allow 11/16'' overlap over side edges of cutout 22'' MIN. above support platform 36'' MIN. For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000. 3/4'' Support platform required Match toe kick height front and two sides 24 4'' To 4-1/2 '' Toe kick allowable Listed by Underwriters Laboratories Specification Created 5/09 320229