GE JVM3670WF Installation Instructions - Page 15
B. Outside Back, Preparing Rear Wall for Outside Back Exhaust, Attach Mounting Plate to Wall
UPC - 084691078319
View all GE JVM3670WF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Installation Instructions B OUTSIDE BACK EXHAUST (Horizontal Duct) INSTALLATION OVERVIEW B1. Prepare Rear Wall B2. Attach Mounting Plate to Wall B3. Prepare Top Cabinet B4. Adjust Blower B5. Mount the Microwave Oven B1. PREPARING THE REAR WALL FOR OUTSIDE BACK EXHAUST F G H I This microwave oven is shipped assembled for top exhaust. You will need the exhaust adaptor for installation in the rear wall opening. To remove the exhaust adaptor from the microwave oven: 5 Remove tape securing damper. 6 Remove and save screw that holds blower plate to microwave. Damper 7 Lift off the blower plate and attached adaptor from the microwave. Back of Microwave 1 Place the mounting plate against the rear wall and align it with the holes drilled earlier. 2 Using a pencil, put dots through holes/notches F, G, H and I (see above illustration). Remove the mounting plate and draw lines extending through the points. This will give the location and size of the box cutout for the rear wall duct. 3 Use a saw (saber or keyhole) to cut out the opening. 4 Place the microwave in its upright position with the top of the unit facing up. 15 8 Slide exhaust adaptor to one side and remove it.