GE JX1530 Installation Instructions - Page 4
Install The Bottom Bracket, And Secure The Top Bracket, Install The Trim Frame, Replace Any Loose - microwave
View all GE JX1530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Installation Instructions ❒ 6 CHECK LEVELING Check the leveling by placing a level at the front and sides of the microwave. It may be necessary to add wood shims under the bottom duct to level the microwave front to back or side to side. ❒ 8 INSTALL THE TRIM FRAME A Place the trim frame over the microwave oven with the vent openings at the bottom. B Press the trim frame into the opening until all sides snap into place. ❒ 7 INSTALL THE BOTTOM BRACKET AND SECURE THE TOP BRACKET Cutout Opening C Open the microwave oven door. Secure the trim frame using four flat-head screws (two on the inside top and two on the inside bottom). Flat-Head Screws Round-Head Screws Positioning Flange A Drill pilot holes through the three holes on the front flange of the bottom duct assembly. B Hold the bottom bracket against the front flange of the bottom duct assembly, lining up the three holes in the bottom bracket with the three holes in the bottom duct. Screw in three round-head screws. Drill pilot holes through the two holes in the tabs on the sides of the bottom bracket. Screw in two round-head screws. C Drill pilot holes through the side holes in the top bracket. Secure the top bracket to the cabinet using two round-head screws. Flat-Head Screws ❒ 9 REPLACE ANY LOOSE ITEMS A Your trim kit is now fully installed. Replace the turntable and turntable support that were removed from the inside of the microwave oven. B Keep these installation instructions and extra screws for future reference and need. Do not place them in the microwave oven. C Replace house fuse or close circuit breaker to restore power at the service panel. MFL38290502 49-40553-1 10-07 JR Printed in Korea 4