GE KTC-810C User Manual - Page 11

Connections

Get GE KTC-810C - Security CamPlus Camera PDF manuals and user guides
UPC - 046188122493
View all GE KTC-810C manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

KTC-510/515/540C/810C/815C/840CE 2 CONNECTIONS See Figure 7 and perform the following: Connections To power supply To local or test monitor To monitor Power LED Figure 7. Back panel connections 1) Attach the monitor's video in BNC connector to the camera's VIDEO OUT connector. 2) With a screwdriver, loosen the ~AC24V/DC12V and the GND terminal connectors on the terminal block. 3) Connect the power source to the terminal block. Note: The terminal block is not polarity sensitive; therefore, either power lead can be connected to either terminal connector. 4) Retighten the terminal connector screws until snug, ensuring that the power leads are secure. 5) Supply power to the unit. Note: Power is now being supplied to the camera, and the power LED illuminates. If the LED is not illuminated, check the terminal block connections and power source. 1041080A / March 2003 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
KTC-510/515/540C/810C/815C/840CE
Connections
1041080A / March 2003
11
2
C
ONNECTIONS
See Figure 7 and perform the following:
To local
or test
monitor
To power
supply
To
monitor
Power LED
Figure 7. Back panel connections
1)
Attach the monitor’s video in BNC connector to the camera’s
VIDEO OUT connector.
2)
With a screwdriver, loosen the ~AC24V/DC12V and the GND
terminal connectors on the terminal block.
3)
Connect the power source to the terminal block.
Note:
The terminal block is not polarity sensitive; therefore, either power lead can
be connected to either terminal connector.
4)
Retighten the terminal connector screws until snug, ensuring that
the power leads are secure.
5)
Supply power to the unit.
Note:
Power is now being supplied to the camera, and the power LED illuminates. If the
LED is not illuminated, check the terminal block connections and power source.