GE KTC-810C User Manual - Page 14

Troubleshooting KTC-510/515/540C/810C/815C/840CE TROUBLESHOOTING Problem No picture on the monitor Probable Cause Solution Lens cap is still in place Remove the lens cap No power to the camera Check that the power LED at the camera is lit If the LED is not lit, check the camera power supply Monitor is not functioning properly Connect a test monitor to the MON OUT connection to check for a local video signal Camera is not set up properly for the lens type Set the lens selection switch for the type of lens being used (VD, DD, or AES) (Figure 3) Ensure that the auto iris plug in is connected properly (Figure 4 and Figure 5) 14 1041080A / March 2003