GE PDT845SSJSS Installation Instructions - Page 2

Installation Preparation PARTS SUPPLIED IN INSTALLATION PACKAGE: • Junction box cover and #10 hex-head screw • Hose clamp • Drain hose (approximately 58" long) • Drain hose hanger • 2 #8-18 hex head screws to secure brackets to washer tub frame • 1 top trim piece (on some models) • 2 side trim pieces • 2 mounting brackets for wood countertops or side cabinets • 2 #8-18 x 5/8" Phillips special head screws, to secure dishwasher to underside of countertop or to side cabinets • Literature, samples and/or coupons Junction Box Cover #10 Hex-Head Junction Box Screw 1/2" long Top Trim Piece (on some models) Hose Clamp Drain Hose Drain Hose Hanger #8 Hex-Head Mounting Bracket Screws Side Trim Pieces Mounting Brackets #8 Phillips Special Head Screws 5/8" long Plug Buttons Literature MATERIALS YOU WILL NEED: • 90° elbow (3/4"hose internal thread on one end, opposite end sized to fit water supply) • UL-listed wire nuts (3) • Masking Tape Materials Needed for New Installations: • Air gap for drain hose, if required • Waste tee for house plumbing, if applicable • Electrical cable or Power Cord Kit WX09X70910 (5.4 Ft) or WX09X70911 (7.9 ft) depending on your installation. • Screw-type hose clamps • Strain relief for electrical connection • Hand shut-off valve (recommended) • Hot Water Line-3/8" minimum, copper tubing (including ferrule, compression nut) or GE Part # WX28X326, flexible braided hose. • WD24X10065 drain hose (12' long), if needed 90°Elbow Wire Nuts (3) Masking Tape (if applicable) Coupler for optional drain hose Air Gap Waste Tee Electrical Cable (or Power Cord, if applicable) Hose Clamps Strain Relief Hand 6KXW2ȹ Valve Hot Water Line Optional 12' Drain Hose WD24X10065 TOOLS YOU WILL NEED: • Phillips-head screwdriver • 1/4" and 5/16" nutdriver • $GMXVWDEOHZUHQFK • Level Phillips-Head Screwdriver • Carpenter's square • Measuring tape • Safety glasses • Flashlight 15/16" Socket • %XFNHWWRFDWFKZDWHUZKHQÀXVKLQJWKHOLQH • 15/16" socket (optional for skid removal) • Gloves • Pliers For New Installations Only: Flashlight • Tubing cutter • Drill and appropriate bits • Hole saw set 2 Gloves 1/4" and 5/16" Nutdriver Level Carpenter's Square Pliers 6" Adjustable Wrench Tubing Cutter Safety Glasses Measuring Tape Bucket Hole Saw Set Drill and Bits